Falcon Lock RX-MEL-25R-L-QUA-US26D-36-LHR KIT RX Motorized Rim Exit Device, Quantum Lever Trim 510L, Satin Chrome

Falcon Lock RX-MEL-25R-L-QUA-US26D-36-LHR KIT is a cutting-edge solution for secure and efficient access control in multifamily and commercial settings. This motorized electric latch retraction (MEL) exit device combines enhanced security with modern convenience, allowing for energy-efficient electronic control of exit points. Designed for 36-inch doors, this left-hand reversible device is compliant with Grade 1 standards and finished in a sleek satin chrome, ensuring durability and aesthetic appeal. With its self-calibrating motor assembly, the RX-MEL-25R offers reliable performance, pulling in the push bar electronically when dogged, while also detecting and responding to attempted tampering. The modular design simplifies installation, making it compatible with existing Falcon 24 and 25 Series exit devices. Whether using credential readers for authorized access or operating in free-entry modes, this exit device provides flexibility tailored to your security needs. To operate, the device requires a 24VDC power supply with a low inrush current of just 1 amp, making it suitable for standard Schlage power supplies. The RX-MEL-25R also supports various monitoring and fail-safe options, further enhancing its functionality. Elevate your security setup with Falcon Lock's innovative exit device, ensuring safety without compromising accessibility.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, Rim Exit Device, Escutcheon x Quantum Lever Trim 510L, (Requires 1-1/4 Mortise Cylinder), 36in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged