Falcon Lock RX-MEL-25V-L-BE-DAN-US26D-48X96-LHR KIT - RX Motorized Electric Latch Exit Device, SVR, Satin Chrome, 24VDC

Falcon Lock RX-MEL-25V-L-BE-DAN-US26D-48X96-LHR KIT offers a state-of-the-art solution for managing access in commercial and multifamily environments. This kit features a motorized electric latch retraction (MEL) system that ensures energy-efficient control of the exit device while allowing for seamless operation. The SVR Surface Vertical Rod Exit Device is complemented by the elegant Dane Lever Trim 510L-BE, providing both functionality and aesthetic appeal in a satin chrome finish (626/US26D). Designed for left-hand reverse (LHR) doors, this exit device operates on 24VDC with a low inrush current of just 1 Amp, making it compatible with standard Schlage power supplies. The modular design simplifies installation, allowing for easy upgrades from mechanical to electronic operation. With built-in diagnostics and a self-calibrating motor assembly, maintenance is straightforward and efficient. The MEL system enhances security by enabling credential readers to control access, providing mechanical egress at all times. Additionally, its vandal-resistant features ensure robust protection against tampering and attacks. With a Grade 1 rating, this exit device combines high performance and reliability, making it an ideal choice for demanding environments. Upgrade your facility's security with Falcon Lock’s innovative exit device solution.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Blank Escutcheon x Dane Lever Trim 510L-BE, 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged