Falcon Lock RX-MEL-25V-L-NL-DAN-US26D-48X96-LHR KIT - RX MEL Motorized Exit Device with Dane Lever Nightlatch Trim 510L-NL

Falcon Lock RX-MEL-25V-L-NL-DAN-US26D-48X96-LHR KIT is designed to enhance security and convenience in multifamily and commercial properties. This advanced exit device features motorized electric latch retraction (MEL), providing an efficient electronic control mechanism for easy egress while ensuring robust safety. The unit is compatible with credentials, enabling authorized access or extended free entry, making it a perfect choice for high-traffic areas. Constructed with a Grade 1 rating and finished in sleek satin chrome (626/US26D), this surface vertical rod exit device measures 48 inches by 96 inches and is configured for left-hand reverse/reversible installation. The energy-efficient 24VDC motor operates at just 1 Amp, allowing longer wire runs and compatibility with standard Schlage power supplies. With features such as a self-calibrating motor assembly, built-in diagnostics for troubleshooting, and vandal resistance, the RX-MEL-25V offers peace of mind for building professionals and homeowners alike. Installation is simplified by its modular design, allowing for easy conversion from mechanical systems. Ensure your facility's safety and accessibility with this innovative exit device, perfect for any modern security solution.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Nightlatch Trim 510L-NL, (Requires 1-1/4 Mortise Cylinder), 48in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged