Falcon Lock RX-MEL-25V-TP-US26D-36X96 RX Motorized Electric Latch Exit Device, SVR, Thumb Piece Pull Trim, Satin Chrome

Falcon Lock RX-MEL-25V-TP-US26D-36X96 KIT features a motorized electric latch retraction (MEL) system designed for seamless access control in multifamily and commercial environments. This innovative exit device combines energy efficiency with robust security, allowing for remote unlocking and extended free entry without compromising safety. The SVR Surface Vertical Rod Exit Device ensures reliable mechanical egress while integrating with credential readers for authorized access. This system is perfect for high-traffic areas, offering a user-friendly alternative to traditional mechanical dogging. With a sleek satin chrome finish (626/US26D), the device not only enhances security but also adds a modern aesthetic to any door setup. Operating at 24VDC and 1 Amp, the RX-MEL-25V is compatible with various power supplies, making installation straightforward. The modular design simplifies upgrades from existing mechanical exit devices, while onboard diagnostics and a self-calibrating motor assembly facilitate maintenance and troubleshooting. Additionally, this device is vandal-resistant, detecting tampering attempts and enhancing overall security. The RX-MEL-25V-TP is designed for doors measuring 36 inches by 96 inches, ensuring a perfect fit for your access control needs. Elevate your security with the advanced features of the Falcon Lock RX-MEL-25V-TP.

KIT - RX Request to Exit, Motorized Electric Latch Retraction, SVR Surface Vertical Rod Exit Device, Thumb Piece Pull Trim 512TP, (Requires 1-1/4 Mortise Cylinder), 36in x 96in, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
• Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
• Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
• On-board installation and troubleshooting diagnostics built into the motor assembly
• Self-calibrating motor assembly
• Push bar is pulled in electronically when dogged
• Vandal resistant – detects and responds to events of attack and tampering

Requirements:

• The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
• The MEL device is compatible with the following equipment: PS900 Series power supplies - PS902, 904, 906, 914; 900 Series Option Boards - 900-2RS, 900-4R and 900-4RL
• A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

Compatible Options:

• Security monitoring (DM, LM, RX)
• Fail Safe/Fail Secure electric trim (FSA/FSE)

EPT Options:

• EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
• EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A

Stock Sizes:

Finishes:

• 605/US3 - Brass, Bright
• 606/US4 - Brass, Satin
• 613/US10B - Bronze, Oil Rubbed
• 619/US15 - Nickel, Satin
• 622/US19 - Black, Matte
• 625/US26 - Chromium, Bright
• 626/US26D - Chromium, Satin
• 629/US32 - Satinless Steel, Bright
• 630/US32D - Satinless Steel, Satin
• 643e/US11 - Bronze, Aged