Falcon Lock RX-MEL-F25V-L-DT-DAN-US26D-36X96-LHR RX MEL Motorized Exit Device, Fire Rated, SVR, 24VDC, Satin Chrome, Grade 1

Falcon Lock RX-MEL-F25V-L-DT-DAN-US26D-36X96-LHR KIT is the ideal solution for applications demanding strength, durability, and fire-rated performance. This surface-applied vertical rod exit device features a sleek touch bar design complete with a top latch and standard deadlocking for enhanced security. The motorized electric latch retraction (MEL) enables efficient electronic control, making it a cost-effective choice for multifamily and commercial facilities. Constructed from extruded aluminum, this device offers impressive strength and impact resistance. The design boasts no exposed screws or rivets, providing a streamlined appearance that integrates seamlessly with any installation. With a field-reversible hand, it caters to a variety of door configurations, while the stainless steel push pad cover ensures a scratch-resistant surface for daily use. Certified to ANSI A156.3-2001 grade 1 standards and featuring a UL rating of "A" Label (3 hr), this exit device is built to last. It accommodates doors up to 1-3/4 inches thick and is compatible with automatic operators, allowing for effortless access. The Falcon Lock RX-MEL-F25V kit is an exceptional choice for those seeking a reliable and attractive exit solution that ensures safety and convenience.

KIT - RX MEL Request to Exit, Motorized Electric Latch Retraction, Fire Rated SVR Surface Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in x 96in, LHR Left Hand Reverse/Reversible, 24VDC 1 Amp, Grade 1, 626/US26D Satin Chrome

When your application requires strength and durability, plus fire rated performance, the F-25-V Series is the total package. This surface-applied vertical rod device includes a sleek touch bar design with top latch and deadlocking standard. Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.

Features:

• Extruded aluminum construction delivers greater strength and impact resistance.
• No exposed screws or rivets on the back of the device for a streamlined design and clean lines for a more attractive installation.
• One trim input design provides maximum versatility and ability to use various trims.
• Stainless steel push pad cover provides a scratch-resistant pushing surface.
• Flush-end caps help prevent them from being destroyed or knocked off in abusive situations.
• Narrow stile center case is ideal for storefront applications with narrow stile aluminum doors.

Specifications:

• Hand: Field reversible.
• UL: "A" Label (3 hr) - 8’ x 10’ double egress; 90 min. same egress - 8’ x 10’ Wood door: 20 min. 8’ x 10’ 90 min. 8’ x 9’. Consult door manufacturer for maximum rating.
• Strikes: 3788 top strike is surface applied. 2130 bottom strike is mortised into floor.
• Latchbolt: Top stainless steel 3⁄4" throw. Bottom bolt, 1⁄2" throw.
• Deadlocking latchbolt: Standard in top latch.
• Latch retention hold: Standard with top latch.
• Stock sizes: See chart below.
• Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
• Projections: 2-3⁄4" maximum.
• Stile: See chart below.
• Electric functions: Can be interfaced with building security systems. Motorized electric latch retraction (fail secure only), FSA/FSE trim, security monitoring, delayed egress and exit alarm available.
• Fasteners: All mounting screws are concealed. All machine screws (AMS) standard.
• Sex bolts: Required when used with wood, composite or non-reinforced hollow metal doors. For EO device, specify 12 - 425 (# 10-24) SNB. For devices with trim, specify 8 - 425 (# 10-24) SNB.
• ANSI: Certified ANSI A156.3-2001 grade 1 standards.
• F-25-V: Latch Retention (LR) top latch and bottom square bolt. 3788 strike top, 2130 flush strike bottom.
• F-25-V-LBR: Less bottom rod vertical device. Auxiliary fire pin required per pair. "A" Label (3 Hr) - 8’ x 8’ 90 min. same egress - 8’ x 8’.
• Vertical rods: Furnished to length based on a 40-1⁄4" horizontal CL from finished floor and a 7’ 0" door standard. Variations from these standards must be specified when ordering.
• Shim kits: For glass lite applications; 1⁄4" thick, specify SK25-V.

StockSizes:

Finishes:

• US3/605 - Brass, Bright
• US4/606 - Brass, Satin
• US10/612 - Bronze, Satin
• US11/643e - Bronze, Aged
• US15/619 - Nickel, Satin
• US19/622 - Black, Matte
• US26/625- Chromium, Bright
• US26D/626 - Chromium, Satin
• US28/628 - Anodized, Aluminum
• US32/629 - Stainless Steel, Bright
• US32D/630 - Stainless Steel, Satin
• 313AN/710 - Anodized Duranodic