Dormakaba ED100LE 34IN SINGLE PUSH CL Door Operator Push Arm, 34in, Medium to Heavy Duty Low Energy, Clear Anodized CL

DormaKaba Architectural Hardware ED100LE 34IN SINGLE PUSH CL Door Operator is a medium to heavy-duty low energy swing door operator designed to enhance accessibility in various settings such as commercial buildings, hospitals, schools, and hotels. Featuring an innovative electromechanical drive, this operator ensures a quick, quiet transition from manual operation to touch-free access. The ED100LE is compatible with both new and existing swing doors and can be activated using a push plate, wave plate, or other actuator devices. Its advanced automatic power assist allows for minimal push forces, achieving as low as ANSI size 1, without compromising reliable door closing. The operator accommodates outswing and inswing doors and is straightforward to install. Key features include a built-in power supply and relay for seamless control, door position status indicators, and the ability to close and latch in the event of power loss with an adjustable closing speed. It has been independently tested to 1 million cycles, guaranteeing durability. The operator supports a maximum door weight of 600 lb and a maximum opening angle of 110°, with dimensions of 2-3/4" x 5-1/8" x 34". The ED100LE is a non-handed solution that integrates effortlessly into any access control system.

Door Operator Push Arm, 34in, Medium to Heavy Duty Low Energy, Clear Anodized CL

The ED100LE Low Energy Swing Door Operator employs an innovative, and super-quiet, electromechanical drive that is a perfect solution for facilities who want a quick, quiet, and painless transition from manual doors to touch-free access such as commercial buildings, hospitals, schools, hotels and multifamily buildings. This swing door operator can automate new or existing swing doors through the use of a push plate, wave plate, or other actuator devices. The ED100LE's advanced automatic power assist combines minimal push forces (as low as ANSI size 1) with reliable closing. All common applications for outswing and inswing doors — either with push arm or pull arm. The ED100LE is easy to install and makes existing doors easily accessible.

Features:

• Seamless control with integrated hardware power supply and relay.
• Independently tested to 1 million cycles
• Built-in door position status, indicating door open or door closed.
• Close and latch in case of power loss (adjustable closing speed on loss of power).
• Hardware pre-load functionality for reliable operation.
• Built-in interface for connection to any access control system.

Specifications:

• Header dimensions(H × W × L): 2-3/4" x 5-1/8" x 34" (Fine)
• Operator weight: 26.5 lb
• Internal power supply available for accessories: 24 volts DC ± 5% 1.5 Amps
• Maximum door opening angle: 110° (door stop recommended)
• Maximum wire size: 16 AWG for incoming power, 18 AWG for all other connections
• Maximum door weight: 600 lb at maximum door width of 48"
• Door width: Minimum by operator type 28" for surface applied. Maximum 48"
• Axle extensions: 13/16" (20 mm), 1-3/16" (30 mm), 2-3/8" (60 mm)
• Reveal depth for pull arm with track: 1-3/16" (30 mm)
• Reveal depth for standard push arm: 0 to 9-3/4"
• Handing: Non-Handed
• Power supply: 115 volts AC ± 10%, 50/60 Hz Maximum 3.3 Amps, (SELV)