Security Door Controls PTH-4Q Power Transfer Hinge, 4 Wire, 1 Amp, 4.5"x4.5", 5ft Lead, Satin Chrome

Security Door Controls PTH-4Q Power Transfer Hinge offers a robust solution for effectively running power and data wires between door frames and the doors themselves. Designed as a standard weight, 5 knuckle hinge, this unit is ideal for use with electric locks and exit devices, ensuring a secure and vandal-resistant installation. Measuring 4.5 inches by 4.5 inches, the PTH-4Q features four conductors with a wire gauge of 26 AWG, allowing for a current limit of 1 Amp per wire. The included 5-foot lead provides ample length for installation, while the hinge itself is tested for up to 800,000 cycles, guaranteeing durability and reliability over time. The satin chrome finish (626/US26D) not only enhances its aesthetic appeal but also ensures lasting performance. The PTH-4Q is particularly suitable for installations requiring electric lock power, door and lock status signaling, and request-to-exit capabilities. It is compatible with a wide range of electrified hardware, including mortise and cylindrical locks, exit devices, and electric strikes. Backed by a wire replacement warranty, the PTH-4Q Power Transfer Hinge is an essential component for any security-conscious installation, providing seamless power transfer while maintaining a sleek look.

Power Transfer Hinge, 4 Wire 1 Amp, 26 AWG (Gauge), 4.5in x 4.5in, 5ft Lead, 626/US26D Satin Chrome

Electric power transfer hinges provide a concealed and vandal resistant method for running wires from the frame to doors equipped with electric locks and exit devices.

Features:

• Standard weight, 5 knuckle hinge
• Wire replacement warranty
• 5’ cable
• Optional: Door position status (DPS)
• Finish: Q/626 dull chrome

Models:

• PTH-4: Four conductor hinge
• PTH-10: Ten conductor hinge
• PTH-2+4: Six conductor hinge

Applications:

• Installed in the center hinge position of the door, PTH power transfer hinges provide the concealed wires required to transfer power from the frame to electric hardware in the door for control and monitoring capability.
• Electric lock power and control
• Door and lock status signaling
• Request-to-exit signaling
• Compatible with:
• Electrified mortise locks
• Electrified cylindrical locks
• Electrified exit devices
• Delayed egress exit devices
• Electric trim
• Electric strikes in pair of doors
• Request-to-exit bars

PTH-4 Specifications:

• Dimensions: 4-1/2" x 4-1/2"
• Cable: 5’
• # Wires: 4
• Wire Guage: 26 AWG
• Current Limit: 1 Amp/wire
• Cycle Test: 800,000
• Weight: 1.2 lbs
• Door Position Status (DPS): SPDT 250 mA @ 30 VDC resistive

PTH-10 Specifications:

• Dimensions: 4-1/2" x 4-1/2"
• Cable: 5’
• # Wires: 10
• Wire Guage: 28 AWG
• Current Limit: 1 Amp/wire
• Cycle Test: 800,000
• Weight: 1.2 lbs
• Door Position Status (DPS): SPDT 250 mA @ 30 VDC resistive

PTH-2+4 Specifications:

• Dimensions: 4-1/2" x 4-1/2"
• Cable: 5’
• # Wires: 6
• Wire Guage: 18 AWG (2), 28 AWG (4)
• Current Limit: 16 Amp Inrush/wire (18 AWG), 4 Amp continuous/wire (18 AWG)
• Cycle Test: 800,000
• Weight: 1.2 lbs
• Door Position Status (DPS): SPDT 250 mA @ 30 VDC resistive