Altronix AL600ACM220 Power Supply Charger Guide

Altronix AL600ACM220 Power Supply / Charger is a versatile solution designed to efficiently manage power for access control systems. With an input of 220VAC at 50/60Hz and a current draw of 1.2A, this unit offers eight independently controlled outputs that can be configured for either 12VDC or 24VDC, delivering a total of 6A continuous supply current. Each output can be activated by an open collector sink or normally open trigger inputs from various access control devices like card readers, keypads, push buttons, or PIR sensors. This power supply is particularly advantageous for applications requiring both Fail-Safe and Fail-Secure modes, making it suitable for a wide array of access control hardware, including magnetic locks and electric strikes. The unit’s ability to operate from a single power source or two independent sources enhances its flexibility in different installations. Additionally, it features a Fire Alarm Control Panel (FACP) interface for emergency egress and alarm monitoring, with individually selectable fire alarm disconnect for each output. Weighing 11.5 lbs, the Altronix AL600ACM220 is a dependable option for commercial settings, including CCTV, fire alarms, and POIP systems, ensuring reliability and efficiency in securing premises.

Power Supply / Charger

Power Supply/Access Power Controller, Input 220VAC 50/60Hz at 1.2A, 8 Fused Outputs, 12/24VDC at 6A,

AL600ACM220 converts a nominal 220VAC 50/60Hz input into eight independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6A. continuous supply current. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two totally independent power sources, one providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight outputs.

Ideal for a multitude of purposes, including CCTV, Fire Alarm and POIP.

A leading global provider of power and transmission technologies for professional security system applications, Altronix develops innovative solutions that integrate disparate infrastructure and maximize overall performance and efficiency.

Altronix Power Supplies are ideal for a multitude of purposes, including:

• General Use
• CCTV
• Fire Alarm
• POIP

Resources

• Altronix Featured IP & Power Products
• Altronix NetWay Spectrum Series Catalog