Adams Rite 7240-310-630-00 12VDC Electric Strike Fire Rat

Adams Rite 7240-310-630-00 Electric Strike is a robust solution designed for hollow metal door jambs, providing advanced access control for cylindrical latch systems. Operating at 12VDC, this fail secure electric strike ensures that the latch remains locked during a power failure, offering enhanced security for commercial applications. Fire-rated for up to 3 hours per UL10C and CAN/ULC-S104 standards, this electric strike is ideal for environments where safety is paramount. Its compact case measures approximately 1" x 3-3/8" x 1-5/8" deep, making it an efficient choice for tight spaces. The strike is engineered to accommodate latchbolts with a maximum projection of 5/8", allowing for seamless operation without manual intervention. The stainless steel construction of both the bolt retainer jaw and strike lip enhances durability while the flat faceplate, measuring 1-1/4" x 4-7/8", provides a sleek aesthetic with square corners. With an amp draw of .33 amps, this electric strike is designed for commercial use, ensuring reliability and performance in high-traffic areas. Upgrade your security system with the Adams Rite 7240 Electric Strike, where functionality meets safety in a stylish design.

Electric Strike 12VDC Fire Rat

Electric Strike, Fire Rated, Cylindrical Latches, 12VDC, Fail Secure, Satin Stainless Steel

For use in hollow metal door jambs.

Remote electrical control of any door equipped with cylindrical (key-in-knob/lever) type locksets with up to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself.

• UL10C, CAN/ULC-S104, fire rated 3 hr.
• Case: Approximately 1” x 3-3/8” x 1-5/8” deep.
• Strike Lip: Basic 7240 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge.
• Strike Opening: 5/8” x 1-7/16” x 9/16” deep. Bolt retainer jaw and strike lip are stainless steel. Strike accepts bolt from a variety of latchsets.
• Faceplate: Measures 1-1/4 x 4-7/8”. Faceplate is flat, with square corners.
• Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Resources

• 7200 Electric Strikes Cut Sheet
• 7240 Fire-Rated Electric Strike for Metal Jamb w/Key-In-Knob Latches Installation Instructions
• 7270 Fire-Rated Electric Strike for Metal Jamb w/Mortise Latches Installation Instructions
• Electric Strike Catalog