Norton 7215MPSO LH 24VDC 689 Electromech Closer Holder

Norton 7215MPSO LH 24VDC 689 Electromechanical Closer/Holder is a versatile solution designed for commercial applications, providing exceptional flexibility for installers and facility managers. This multi-point electromechanical closer/holder features a selective hold open function, allowing doors to remain open at any desired angle up to 180 degrees, enhancing accessibility while ensuring safety. Constructed from durable cast aluminum alloy, the unit is surface-mounted and projects no more than 2-5/8 inches from the frame, making it a sleek addition to any door system. The hydraulic, full rack and pinion design ensures smooth operation, while its non-gumming and non-freezing hydraulic fluid guarantees reliable performance in various conditions. With two independent valves for regulating closing and latch speed, along with an adjustable backcheck, users can easily customize the closing power, allowing for up to a 50% increase over the minimum force. Importantly, this unit is fail-safe, automatically closing the door during power interruptions, providing peace of mind in any emergency situation. Available in a matte silver finish, the Norton 7215MPSO is an ideal choice for those seeking a high-quality, reliable electromechanical closer/holder that meets the demands of modern commercial environments.

Electromech. Closer/Holder

Electromechanical Closer, Slave/Support Unit, Selective Hold Open, Size 5, Rigid Slide Arm & Track, LH, 24VDC, Aluminum

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers. Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180¡. Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.

The 7200 Series is a multi-point electromechanical closer/holder that provides flexibility to installers and facility managers.

Shipped standard with selective hold open, the 7200 Series is designed to hold the door open at any point up to 180°.  Available for push or pull side mounting, these units can be ordered with integral smoke detectors or remote wireless door releases.  

• Units shall be surface mounted to the frame face [on the pull (hinge side) on the push (opposite hinge side)] of the door [and shall project no more than 2-5/8" (67mm) from the surface of the frame].
• (Closer shall be installed in the header of the frame, and the slide track mortised into the door’s top rail).
• Closer unit shall be hydraulic, full rack and pinion type with a cast aluminum alloy shell. 
• Hydraulic fluid shall be non-gumming and non-freezing.
• Closer unit shall have two non-critical valves to independently regulate closing and latch speed.
• It shall also have an adjustable backcheck with a hex-key.
• Closer unit shall have spring power adjustment to permit a 50% increase in closing power over the minimum closing force for any size.
• Electromechanical Closer shall have (Infinite) (Selective) Hold Open (Free Swing Operation) and shall be able to attain a maximum opening of 180° (with hold open to 175°).
• Unit to be fail safe and must close the door during any electrical power interruption to the unit. 
• (Closer/Holder to be Executive Door Holder/Release with release actuated by battery operated hand-held controller).

Resources

• 7200 Electromechanical Closer
• 7200 Series Door Closer - Environmental Product Declaration (EPD)
• 7200 Series Electromechanical Closers Cut Sheet
• 7210, 7250 (Pull Side), 7220, 7230 (Push Side) Instruction Manual
• 7290MPI, 7290 MPS Overhead Concealed Closer/Holder
• 7290MPI, 7290MPS x 790 Fire Block Overhead Concealed Closer/Holder
• Master (MPDO), Slave/Support (MPSO) Units (7200 Series)
• Master (PTDO) or Support (PTO) Units, Push or Pull Side