Don-Jo 1157147-628 33CTC 90 Offset Push/Pull Hardware Set

Don Jo 1157147-628 33CTC 90 Degree Offset Push/Pull Set is designed to enhance accessibility and functionality in commercial settings. This versatile set includes both a push bar and an offset door pull, ensuring ease of use for everyone. The push bar measures 33" CTC with a 1" diameter, featuring a 3-1/2" projection and 2-1/2" clearance, while the offset pull boasts a 10" CTC, also with a 1" diameter and similar projection and clearance. Constructed from durable aluminum, the satin aluminum clear anodized finish adds a modern touch while ensuring longevity and resistance to wear. This push/pull set meets accessibility standards, making it easy to operate with one hand without requiring tight grasping or twisting of the wrist, which is particularly beneficial in high-traffic environments. Ideal for commercial installations, this product is designed for a height that accommodates all users, as it can be mounted no higher than 48 inches above the finished floor. With a limited one-year warranty, the Don Jo 1157147-628 Push/Pull Set is not only practical but also a reliable choice for enhancing door accessibility and functionality in any building.

90 Degree Offset Push/Pull Set

Push/Pull Set Includes 1157 and 147, Push Bar, 33" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 34" Overall, Offset Door Pull, 90 Deg., 10" CTC, 1" Diameter, 3-1/2" Projection, 2-1/2" Clearance, 11" Overall, Satin Aluminum Clear Anodized Finish

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.

Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.

Resources

• Door Pulls, Push and Pull Plates Cut Sheet