Ives 112XY 95IN 710 Heavy Duty Continuous Hinge - 95in, 1-3/4in Doors, 450lbs, Grade 1, Dark Bronze

Ives 112XY 95IN 710 Full Mortise Heavy Duty Continuous Hinge offers an exceptional solution for high-use and high-traffic doors. Designed for 1-3/4 inch doors, this continuous hinge is engineered to support door weights of up to 450 pounds without reinforcing, making it the ideal choice for heavy-duty applications. The patented center-loaded, interlocking bearing design ensures a smooth operation while distributing the weight of the door evenly along the full length of the frame. This unique design significantly reduces stress at the top of the door and frame, minimizing the risk of hinge failure and maintaining door alignment to prevent sagging. The flush-mounted design allows for seamless installation without any inset. Measuring 95 inches in length, the Ives 112XY is suitable for doors with a maximum width of 48 inches and can accommodate both beveled and square edges. It exceeds Grade 1 ANSI/BHMA 156.26 standards, ensuring durability and reliability. Available in a stunning anodized dark bronze finish, this hinge not only performs exceptionally but also enhances the aesthetic of any entryway. With optional mounting hardware and electrical transfer capabilities, the Ives 112XY 95IN 710 Continuous Hinge is a versatile choice for modern security and accessibility needs.

Full Mortise Heavy Duty Continuous Hinge - 95in, 1-3/4in Doors, up to 450lbs, Grade 1, UL 90 Minute, 710/313 Anodized Dark Bronze

Geared continuous hinges are designed to last the life of a building by distributing the weight of a door along the entire length of its frame. The unique design reduces the high amount of stress normally associated at the top of the door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps a door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

Features:

• For 1 3⁄4" doors
• Patented center loaded, interlocking bearing design
• Non-handed for custom cut lengths
• Flush mounted, no inset
• 48" Maximum door width
• Beveled or square edge doors
• For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing
• Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps

Specifications:

• Standard length: 83", 85", 95", 119"
• Standard mounting hardware: 12-24 x 3⁄4" Steel self drilling/self tapping phillips head screw
• Certifications: Exceeds Grade 1 ANSI/BHMA 156.26 for 150lbs and 300lbs

Options:

• EPT: Electric power transfer
• HT: Hospital tip
• TWP CON: Electrical through-wire panel with Allegion Connect

Optional Mounting Hardware:

• SECHM: Security screws - hollow metal door and frame
• SECWDHM: Security screws - 1⁄2 wood, 1⁄2 hollow metal
• SECWDWD: Security screws - wood door and frame
• TEKWD: 1⁄2 Self drill, self tap 1⁄2 wood
• WD: Wood door and frame

Finishes:

• US28/628 - Clear Aluminum Anodized
• 313AN/710 - Dark Bronze Anodized