Blog
Minimum order $100 · Orders $100–$149.99 include a small-order fee ($20 down to $8) · No fee from $150
  1. Home
  2. Shopping Cart
Altronix AL300ULM Power Supply
Images may not represent actual product and finish

Altronix AL300ULM Power Supply

Your Price: $350.91
Retail Price:$456.91
Your Savings:$106.000(23%)
Power Supply with Fire Alarm Disconnect, Input 115VAC 60Hz at 3.5A, 5 PTC Outputs, 12/24VDC at 2.5A, Grey Enclosure
Part Number : ALT_AL300ULM
Availability: 0 Ship time varies. We email you if your order is delayed.
Altronix AL300ULM Power Supply

AL300ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.
  • Input:
  • Input 115VAC / 60Hz, 3.5 amp.
  • Input fuse rated @ 3.5 amp/250V.
  • Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
  • Output:
  • 12VDC or 24VDC selectable outputs.
  • 2.5 amp supply current.
  • Burglar Alarm Applications:
  • 12VDC = 10VDC-13.2VDC
  • 24VDC = 20VDC-26.4VDC
  • Five (5) PTC protected outputs, rated @ 2 amp.
  • Output relay energizes when unit is triggered (form "C" contact rated 1 amp @ 28VDC).
  • Filtered and electronically regulated output.
  • Short circuit and thermal overload protection.
  • Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Automatic switch over to stand-by battery when AC fails.
  • Maximum charge current 0.7 amp.
  • Supervision:
  • AC fail supervision (form "C" contacts).
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery supervision (form "C" contacts).
  • Battery presence supervision (form "C" contacts).
  • Power fail supervision relay (form "C" contacts).
  • Visual Indicators:
  • AC input and DC output LED indicators (power supply board).
  • Red LEDs indicate condition of power outputs (multi-output board).
  • Power and input trigger LEDs (multi-output board).
  • Electrical:
  • Operating temperature: 0° C to 49° C ambient.
  • BTU/Hr.:
  • 12VDC: 15.35 BTU/Hr.
  • 24VDC: 30.71 BTU/Hr.
  • System AC input VA requirement: 402.5VA.
  • Mechanical:
  • Enclosure Dimensions (H x W x D approx.): 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm)
  • Accommodates up to two (2) 12VDC/7AH batteries.
  • Product weight (approx.): 7.6 lbs. (3.45 kg).
  • Shipping weight (approx.): 8.6 lbs. (3.9 kg).

Features

  • Supervision:
  • Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • 24VDC = 20VDC-26.4VDC
  • Product weight (approx.): 7.6 lbs. (3.45 kg).
  • Input:
  • Five (5) PTC protected outputs, rated @ 2 amp.
  • Battery Backup:
  • Red LEDs indicate condition of power outputs (multi-output board).
  • 12VDC = 10VDC-13.2VDC
  • Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
  • Shipping weight (approx.): 8.6 lbs. (3.9 kg).
  • System AC input VA requirement: 402.5VA.
  • 12VDC: 15.35 BTU/Hr.
  • Enclosure Dimensions (H x W x D approx.): 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.55mm)
  • Battery presence supervision (form "C" contacts).
  • Burglar Alarm Applications:
  • Visual Indicators:
  • Electrical:
  • Mechanical:
  • Input 115VAC / 60Hz, 3.5 amp.
  • BTU/Hr.:
  • Short circuit and thermal overload protection.
  • AC fail supervision (form "C" contacts).
  • Low battery supervision (form "C" contacts).
  • Accommodates up to two (2) 12VDC/7AH batteries.
  • Filtered and electronically regulated output.
  • Automatic switch over to stand-by battery when AC fails.
  • 12VDC or 24VDC selectable outputs.
  • Output relay energizes when unit is triggered (form "C" contact rated 1 amp @ 28VDC).
  • Power and input trigger LEDs (multi-output board).
  • Output:
  • 2.5 amp supply current.
  • 24VDC: 30.71 BTU/Hr.
  • Input fuse rated @ 3.5 amp/250V.
  • Power fail supervision relay (form "C" contacts).
  • Operating temperature: 0° C to 49° C ambient.
  • Maximum charge current 0.7 amp.
  • Built-in charger for sealed lead acid or gel type batteries.
  • AC input and DC output LED indicators (power supply board).

Attributes

Access Type: Power Supply

Alternate Codes: 138506, AL300ULM, PIB1230ULM

Category: Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies

Output Amps: 2.5 AMPS

Output Volts: 12/24 VDC

Purpose: Fire Alarm

Series: Altronix Power Supplies

Subtype: Power Supply

Type: Wire-In Transformer

Voltage/ Amp Rating: 12 - 24V DC

Resources

Browse Similar Items

Recently Viewed Items

TOP Logo