Ives 112HD 83IN 710 Heavy Duty Continuous Hinge - 83in for 1-3/4in Doors, 450lbs, Dark Bronze

Ives 112HD 83IN 710 Full Mortise Heavy Duty Continuous Hinge offers a robust solution for high-traffic areas, effectively distributing the door's weight along its full length. Designed for 1-3/4 inch doors, this hinge supports doors weighing up to 450 pounds without reinforcement and up to 600 pounds with it, ensuring durability where it matters most. Its flush-mounted design eliminates any inset, providing a clean appearance that is suitable for both beveled and square edge doors. This continuous hinge features a spread bearing design that significantly reduces the stress typically found at the top of a door, thus preventing sag and misalignment over time. The non-handed feature allows for custom cut lengths, making it adaptable to various door sizes with a maximum width of 48 inches. Built to exceed Grade 1 ANSI/BHMA 156.26 standards for both 150 and 300-pound applications, it is an ideal choice for commercial and residential settings alike. Available in a striking dark bronze anodized finish, the Ives 112HD 83IN 710 combines functionality with aesthetic appeal. Optional mounting hardware is available for enhanced security, catering to a variety of installation needs. Elevate your door’s performance and longevity with this top-tier continuous hinge.

Full Mortise Heavy Duty Continuous Hinge - 83in, 1-3/4in Doors, up to 450lbs, 710/313 Anodized Dark Bronze

Geared continuous hinges are designed to last the life of a building by distributing the weight of a door along the entire length of its frame. The unique design reduces the high amount of stress normally associated at the top of the door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps a door in constant alignment, eliminating the chance of door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

Features:

• For 1 3⁄4" doors
• Spread bearing design
• Non-handed for custom cut lengths
• Flush mounted, no inset
• 48" Maximum door width
• Beveled or square edge doors
• For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing

Specifications:

• Standard length: 83", 85", 95", 120"
• Standard mounting hardware: 12-24 x 3⁄4" Steel self drilling/self tapping phillips head screw
• Certifications: Exceeds Grade 1 ANSI/BHMA 156.26 for 150lbs and 300lbs

Options:

• EPT: Electric power transfer

Optional Mounting Hardware:

• SECHM: Security screws - hollow metal door and frame
• SECWDHM: Security screws - 1⁄2 wood, 1⁄2 hollow metal
• SECWDWD: Security screws - wood door and frame
• TEKWD: 1⁄2 Self drill, self tap 1⁄2 wood
• TF: Thread forming screws
• WD: Wood door and frame

Finishes:

• US28/628 - Clear Aluminum Anodized
• 313AN/710 - Dark Bronze Anodized