Pemko S88W 510FT Smoke Seal 510ft Roll White

Pemko Manufacturing Co S88W 510FT Smoke Seal is an essential solution for ensuring fire and smoke control in various building applications. This 510-foot roll of high-temperature silicone gasket compresses to seal gaps up to 1/16", starting its compression at just 1/4". Designed for durability, the SiliconSeal remains effective in extreme temperatures, functioning between -58°F and 450°F, and is self-extinguishing, non-toxic, and resistant to sunlight and ozone. The S88W meets stringent standards, having been smoke tested in accordance with UBC 7-2 and UL 1784-01, as well as complying with NFPA 105 regulations. Its air infiltration rating is impressively low at only .09 CFM per foot of crack, ensuring a tight seal against smoke and drafts. This gasket is categorized for use with various door types, including those rated for up to three hours of fire resistance. It must be applied to the side of the frame using its self-adhesive backing, making installation straightforward. The product is available in multiple colors, including white, which is ideal for aesthetic integration into any environment. For optimal performance, store this product between 50°F and 100°F and use within six months of purchase. Enhance your building's safety and efficiency with the Pemko S88W 510FT Smoke Seal.

Smoke Seal 510ft Roll White

The S88 adhesive perimeter gasket compresses to seal up to a 1/16" gap and is available with perforations for behavioral health applications.

Features:

• Seal begins compressing at 1/4", compresses to seal up to a 1/16" gap
• SiliconSeal is extruded from high-temperature silicone; effective between -58°F and 450°F
• Meets FAR 25.853 Airworthiness Standards for Compartment Interiors
• Smoke tested in accordance with UBC 7-2 and UL 1784-01; meets the requirements of NFPA 105
• Air infiltration tested in accordance with ASTM E-283-04. Air infiltration is only .09 CFM / ft of crack.
• Category B - Doors - additional edge sealing system required - see Category G. Requires Category G system with gasket for fire and possibly smoke
• Category G - Edge-Sealing Systems - systems that are surface applied to frames or doors and required for Category B doors
• Category H - Gasketing - Smoke and draft control for positive pressure openings. Recommended products are PK33, PK55, S44, S88 and S773
• Category H gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes without hose stream. When applied to the door and frame assembly in accordance with the manufacturers installation instruction, the assembly will comply with UBC 7-2 (1997) part II
• Category J - Doors - gasketing that has been tested on a positive pressure fire door and frame but is not required for the door to obtain its fire door rating. Category J gasketing does not negatively affect the rating on a positive pressure door
• Category J gaskets for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to and including 3 hours; wood and plastic covered composite doors rated up to and including 1-1/2 hours; and wood core doors rated for 20 minutes
• Limited shelf life - product must be used within 6 months of purchase and must be stored between 50 degrees (F) and 100 degrees (F)
• Self-extinguishing, non-toxic and unaffected by sunlight, ozone and ultraviolet rays.
• Impervious to fungus and mildew; will not deteriorate under normal exposure

Specifications:

• Gasketing Material: Silicone
• Height: 1/4"
• Maximum Length: 510'
• Minimum Length: 17'
• Mounting Location: Side of frame
• Mounting Type: Self-adhesive
• Weight: 0.03 lbs
• Width: 1/2"

Colors:

• C - Clear
• GR - Gray
• TAN - Tan
• D - Dark brown
• BL - Black
• W - White