CRL GR25HPB Polished Brass 90 Horizontal Corner for 1/2" or 5/8" Glass RailingC.R. Laurence GR25HPB Polished Brass 2-1/2" Diameter 90 Degree Horizontal Corner for 1/2" or 5/8" Glass Cap Railing offers a sophisticated solution for achieving seamless, hairline joint assemblies in glass railing systems. Designed for 1/2" (12 mm) or 5/8" (16 mm) thick glass, this corner fitting is expertly fabricated from CRL Premium Cap Rail, ensuring durability and a polished finish that complements any architectural style. Each unit is individually packed and ready to install, saving you time on the job site. For added convenience, the GR25HPB is available in four architectural finishes, allowing you to match the aesthetic of your project. Note that two connector sleeves are required for installation, although they are not included with the product. To ensure a secure and permanent bond when using the corner with glass, CRL’s Cat. No. 32629 Metal Contact Cement is recommended. When working with 1/2" glass, utilize the GR5PV Cap Rail Vinyl and 95CBL Silicone for added security, while shims and 95CBL Silicone should be used with 5/8" glass. Please be aware that while the polished brass finish is elegant, it may be prone to oxidation over time. For more information, consult the Brass Finish Disclaimer in the Technical References section.
Polished Brass 2-1/2" Diameter 90 Degree Horizontal Corner for 1/2" or 5/8" Glass Cap Railing
- Welded, Finished, and Ready-to-Install
- Four Architectural Finishes
- Requires Two Connector Sleeves (Not Included)
Interior slip-fit Horizontal Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for hairline joint assemblies with straight lengths of
CRL Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.
Each Horizontal Corner is fabricated, finished, and individually packed. All of our stainless and brass corners are fabricated from CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For brass, alloy 260 is standard.
Please contact
CRL Technical Sales for more information or a quote.
NOTE: With the exception of the GR15 Series Cap Rail Corners, when used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When using GR15 Series Cap Rail Corners or 5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
Product Warning:
When used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When used with 5/8" (16 mm) glass, secure with shims and 95CBL Silicone.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Brass Finish Advisory:
Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.
Attributes
Angle: 90
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 2-1/2 in. (64 mm)
Finish/ Color:: Polished Brass
Material: Brass
Shipping Limitations: None
Resources
