CRL UV604L1K UV604L Medium Viscosity UV/Visible Adhesive - 1000gC.R. Laurence UV604L1K UV604 Medium Viscosity UV/Visible Light Adhesive - 1000g is expertly formulated to deliver exceptionally strong glass-to-metal bonds across a variety of substrates including glass, stainless steel, aluminum, and ceramics. This medium viscosity adhesive cures effectively under both UV and visible light, making it an ideal choice for applications involving laminated safety glass, where typical UVA radiation is absorbed by the PVB film. With a tensile shear strength of 2968 psi, this adhesive ensures reliable performance, providing optically clear cured bonds that resist moisture and thermal cycling. The acceptable bondline gap ranges from 0.5 to 1 mil (0.0127 to 0.0254 mm), allowing for precision application. Due to its lack of capillary properties, the adhesive must be applied directly to the bonding surfaces prior to assembly. For optimal adhesion, pre-cleaning surfaces with a suitable cleaner and degreaser is recommended to eliminate any contaminants. Please note that this adhesive should not be used on coated metals or some plastics without prior testing. Store away from sunlight to maintain its effectiveness, and enjoy a shelf life of 12 months from the lot date.
UV604L Medium Viscosity UV/Visible Light Adhesive - 1000g
- Especially Strong Glass to Metal Bonds
- UV and Visible Light Cure
- Medium Viscosity
- Optically Clear
- Acceptable Bondline Gap: 0.5 to 1 mil (.0127 to .0254 mm)
- Tensile/Shear Strength: 2968 psi
CRL UV604 is a medium viscosity, 100% solids, UV/Visible light curable adhesive formulated to form high tensile shear and peel strength bonds to a variety of substrates such as glass, laminated glass, steel, stainless steel, aluminum, ceramic, stone, wood and some plastics. This adhesive does not have capillary properties; therefore it must be applied to the bonding surface prior to assembling the parts.
Of particular interest is its suitability for bonding laminated safety glass. The PVB film between laminated glass panes absorbs almost all of the UVA radiation, but because this adhesive has been made to also cure by daylight, it reacts with the remaining radiation (above 380nm) and cures completely.
Cured bonds of
CRL UV604 are optically clear, resistant to moisture and thermal cycling. Store adhesive away from sunlight.
Cleaner and Degreaser provides for optimum adhesion when used first to prepare the glass by removing any dirt and grease that is present.
Note: When bonding plastics, always test first, as not all plastics can be bonded properly. Do not bond any coated parts (powder coated or galvanized) with this adhesive.
Product Warning:
Shelf Life: 12 months from lot # date on label
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Ship via: No UPS - Common Carrier Only
Acceptable Bond line Gap: 0.5 mil To 1 mil(0.013 mm To 0.025 mm)
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Contents: 1000 Grams
Medium Viscosity: Yes
Shelf Life: 12 Months
Shipping Limitations: Hazardous Material - No Air Shipments
Tensile Strength: 2968 psi(20463.6 Kpa)
Resources
