Sargent 55-8904F LHR 32D Mortise Exit Device, NL Function

Sargent 55-8904F LHR 32D Mortise Exit Device, NL Function is a Grade 1 mortise exit bar designed for durability and security in high-traffic commercial environments. Featuring a wide stile pushpad and a 36-inch length, this device is equipped with a night latch function and a request to exit switch, ensuring easy operation while maintaining safety compliance. Constructed with modular components and minimal moving parts, the Sargent 8900 Series exit device promises reliable performance and low maintenance. Its concealed single-point guarded latching enhances security for standard width stile applications on both wood and metal doors, making it an ideal choice for various facility types. The left-hand reverse handing accommodates specific door configurations, while the hex key dogging option provides additional control over access. This exit device is designed for doors 1-3/4 inches thick and requires a minimum stile size of 4-1/2 inches. With a satin stainless steel finish (630/US32D) that complements any décor, the Sargent 55-8904F not only meets but exceeds ANSI/BHMA Grade 1 standards for cycle and strength, ensuring it will stand the test of time. Trust in Sargent for a robust and efficient exit solution for your commercial needs.

Mortise Exit Dev, NL Function

Grade 1 Mortise Exit Bar, Wide Stile Pushpad, 36" Device, Night Latch Function, Request to Exit Switch, Hex Key Dogging, Satin Stainless Steel Finish, Left Hand Reverse

The Sargent 80 Series exit devices are ideal for environments that require strong and durable security solutions that will last the life of the building. Available in rim, mortise, surface vertical and concealed vertical rod configurations, these exit devices easily exceed ANSI/BHMA Grade 1 requirements for cycle and strength. With modular construction and few moving parts, the 80 Series devices are maintenance-free and provide unsurpassed security for any facility. Plus, options are available for unique applications including delayed egress, alarmed exit and electric latch retraction making these exit devices the go-to product in your building.

The 8900 Series is for single door applications

8900 Mortise Lock Exit Device has concealed single point guarded latching for additional security and is designed for standard width stile applications on wood and metal doors.

• Door Types: Wood or metal 1-3/4"(44mm) Thick Door;Over 1-3/4" specify thickness and order as a 31- option.  4-1/2" (114mm) minimum stile
• Door Widths: E Rail - 24" to 32" (61cm to 81cm) No cutting required for 32" door; F Rail - 33" to 36" (84cm to 91cm) No cutting required for 36" door; J Rail - 37" to 42" (94cm to 107cm) No cutting required for 42" door; G Rail - 43" to 48" (110cm to 122cm) No cutting required for 48" door

Resources

• 16- 816 Cylinder Dogging Kit (80 Series Exit Device) Installation Instructions
• 43-Flush End Cap Rail Cutting Installation Instructions
• 55-Signal Switch for 80 Series Installation Instructions
• 56-Electric Latch Retraction Exit Device Sell Sheet
• 565 & 665 Metal End Cap Kit Installation Instructions
• 57-Delayed Action 80 Series Exit Device Installation Instructions
• 57-Delayed Egress for 80 Series Exit Devices to ElectroLynx Connector System Installation
• 59-Electroguard Delayed Egress for 80 Series Exit Devices Installation Instructions
• 80 Series Brochure
• 80 Series Exit Device Environmental Product Declaration
• 816 Cylinder Dogging Kit Parts List
• 8300 Series Narrow Mortise Exit Devices Cut Sheet
• 8600/8700/8800/8900 Wide Stile Rail Assemblies Parts List
• AL- Alarmed Exit Device Installation Instructions
• Anti Vandal Pull Trim Instructions - 8800, 8900, PE80
• Basic Fundamentals - Exit Devices
• Electric Dogging for 80 Series Installation Instructions
• Mounting 80 Series Exit Device with Glass Bead Shim Kit Installation Instructions
• Thru-Bolt for 80 Series 8700,8800 and 8900 Installation Instructions
• Windstorm Solutions - Exit Devices