Security Door Controls LR100-FCK QuietDuo Retrofit Motorized Electric Latch Retraction Kit for 3790/3690 Exits

Security Door Controls LR100-FCK QuietDuo Retrofit Motorized Electric Latch Retraction (ELR) Kit is engineered to enhance the functionality of panic and fire-rated mechanical exit devices, specifically designed for 36-inch openings. This innovative kit allows for seamless electric access control and dogging capabilities, ensuring that when energized, the motor retracts the exit device latch while simultaneously pulling the pushpad into a dogged position. This enables both momentary and sustained push-and-pull operation, catering to high-traffic environments. One of the standout features of the LR100-FCK is its low current draw and quiet operation, making it a durable yet efficient choice for modern security applications. It is compatible with various exit device brands, allowing for retrofit installation without the need to remove existing hardware. The motorized design not only provides long-term cost savings by avoiding expensive replacements but also reduces installation time. With an input voltage of 24 VDC and a current draw of 1.5 amps inrush and 200 mA continuous, this kit meets rigorous standards including A156.3, ANSI, BHMA, and UL certifications. Trust Security Door Controls to deliver reliable, effective solutions tailored to meet your security needs with the LR100-FCK QuietDuo Retrofit Kit.

QuietDuo, Retrofit Motorized Electric Latch Retraction (ELR) Kit, First Choice Field Install Kit for 3790/3690 Exits, 36in Only Opening

SDC’s QuietDuo LR100 series retrofit electric latch retraction kits enable electric access control and dogging of panic and fire rated mechanical exit devices. When energized the motor retracts the exit device latch and pulls the pushpad into the dogged (depressed) position enabling momentary or sustained push and pull operation of the door. The latch retraction mechanism may be activated by an access control, remote control device or building automation system. No door sequencer required for a pair of manual doors when connected to a suitable power supply. The exit device always provides uninhibited egress. The patented design was the first retrofit motorized electric latch retraction kit brought to market and has been recognized as the market leader ever since. The use of a motorized electric latch retraction device provides several advantages over solenoids including lower current draw, quieter operation and greater durability over time. Designed with cost savings in mind, SDC’s LR100 series retrofit ELR kits not only eliminate the need for costly replacements of existing exit devices, but also provide cost savings on installation and power requirements due to significantly less labor time and current draw when compared to competitive retrofit kits. LR100 kits retrofit select exit device brands without removing the device from the door. LR100 models are one unit completely housed within the rail of the device behind the access cover, whereas LR100-EM models are two piece space saver units, intended to gain up to one inch in spacing within the device, placing the controller board externally to accommodate smaller field cut devices for smaller openings or where space is limited within the rail.

Features:

• Motorized electric latch retraction and dogging
• Panic and fire rated devices
• Simultaneous latch retraction, dogging and pushpad depression. Select models do not retract pushpad, only retract the latch.
• High traffic use
• Low current draw
• Low energy operator compatible

Models:

• LR100: Motorized electric latch retraction kit
• LR100-EM: Motorized electric latch retraction kit, external module

Applications:

• SDC’s retrofit motorized electric latch retraction kits are designed to be field installed. However, SDC also offers to install the kit at SDC’s factory. Simply send the mechanical exit device brand of your choice to SDC for factory install. The table below outlines exit device combability and part numbers for both field install and factory installed LR100 kits.

LR100 Specifications:

• Type: Retrofit ELR kit
• Input: 24 VDC ± 10%
• Current Draw: 1.5 Amp inrush, 200 mA continuous
• Latch Retraction: Motorized

LR100-EM Specifications:

• Type: Retrofit ELR kit, external module
• Input: 24 VDC ± 10%
• Current Draw: 1.5 Amp inrush, 200 mA continuous
• Latch Retraction: Motorized

Specify Model:

• Adams Rite: LR100ARK, LR100ARK-EM, LR100AREXK-EM
• Arrow: LR100AWK, LR100AWK-ED910
• Corbin Russwin: LR100CRK, LR100CRK-EM
• Cal-Royal: LR100CAK, LR100CAK-9800, LR100CAK-EM
• Design Hardware: LR100DHK
• Detex: LR100DXK
• Dorma: LR100DAK
• Dor-O-Matic: LR100FAK, LR100FAK-EM, LR100DMK
• Falcon: LR100FRK
• First Choice: LR100FCK, LR100FCK-EM
• Hager: LR100HK, LR100HK-EM
• IDC: LR100IDCK, LR100IDCK-EM
• Jackson: LR100JAK
• Marks: LR100MDK
• Marshall Best: LR100MBSK, LR100MBSK-EM
• Pamex: LR100PAK, LR100PAK-EM
• PDQ: LR100PDQK
• PHI (Precision): LR100PDK
• Sargent: LR100SGK, LR100SGK-EM
• SDC: LR100SDCK, LR100SDCK-EM
• Stanley K2: LR100K2K, LR100K2K-EM
• Tell: LR100TEK
• Townsteel: LR100TSK, LR100TSK-EM, LR100TSK-55/56, LR100TSK-65/67
• Von Duprin: LR100VDK-22, LR100VDK-22V2, LR100-VDK-22-EM, LR100-VDK-22V2-EM, LR100VDK, LR100VDK-EM
• Yale: LR100YDK, LR100Y6K, LR100YDK-EM, LR100Y6K-EM, LR100YDK-42/48