Von Duprin 3327AEO 3 26D LBR Grade 1 Narrow SVR Exit Device 626

Von Duprin 3327AEO 3 26D LBR Grade 1 Narrow SVR Exit 626 is a highly reliable exit device designed for narrow stile doors, ensuring safety and efficiency in emergency situations. This Grade 1 surface vertical rod exit device features a sleek pushpad design and measures 36 inches, making it ideal for both single and double doors. With its satin chrome finish, the device not only enhances security but also complements a variety of architectural styles. Engineered for ease of use, the 3327AEO includes hex key dogging and operates as an exit-only device, providing straightforward egress without the need for additional trim. Its non-handed configuration allows for flexible installation on doors with widths ranging from 28 to 36 inches and a height of up to 84 inches. The deadlocking anti-friction latch bolts ensure maximum security with a 5/8-inch throw. The device is UL listed for panic exit hardware and meets ANSI A156.3 - 2008 Grade 1 standards, guaranteeing its durability and effectiveness in high-traffic areas. With a limited three-year warranty, the Von Duprin 3327AEO is an excellent choice for commercial settings where safety and reliability are paramount.

Grade 1 Narrow SVR Exit 626

Grade 1 Surface Vertical Rod Exit Device, Narrow Stile Pushpad, 36", Exit Only, Less Trim, Hex Key Dogging, Less Bottom Rod, Satin Chrome Finish, Non-Handed

3327A and 3527A for all types of single and double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 - 2008 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. The surface vertical rod device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions.

Devices are ANSI A156.3 – 2001 Grade 1.

The 3327A has grooved case and the surface vertical rod device is non-handed except when the SS (signal switch) option is used. 

• Device lengths: 2' 2' (610 mm) Door size 3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size
• Device centerline from finished floor: 39 13/16" (1006mm) Center case dimensions 8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm)
• Mechanism case dimensions: 2 1/4" x 2 1/4" (57mm x 57mm)
• Projection: Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm)
• Latch bolt: Deadlocking anti-friction top & bottom bolt 5 /8" (16mm) throw
• Door undercut: 1 /4" (7mm)
• Top & bottom latch: 4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)
• Vertical rods: 1 /2" square tubing, standard rods accommodate 7'(2134mm) door Top rod length is 34 15/16" (887mm) Bottom rod length is 31 1/4" (794mm) Extension rods available 1' (205mm) or 3' (914mm) for doors over 7' One piece top rod available for 8' (2438mm) -10' (3048mm) door
• Fasteners & sex bolts (SNB): Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) #325 SNB furnished for top and bottom latches

Resources

• 3327A Series Surface Vertical Rod Exit Device Cut Sheet
• 3327A/3527A Installation Instructions
• 3327A/3527A Surface Vertical Rod Exit Device Service Manual
• EL for Exit Devices Data Sheet
• QEL Data Sheet
• QEL Sell Sheet
• Quiet Electric Latch FAQ
• SS333NL/TP Trim for 33/3527 Device Metal Door Installation Instructions
• Von Duprin 33/35 and 98/99 ALK Alarm Kit Installation Instructions
• Von Duprin 33/35 and 98/99 End Cap Retrofit Kit Installation Instructions
• Von Duprin 33/99 LD Kit Installation Instructions
• Von Duprin Exit Alarm Kit Sell Sheet
• Von Duprin Finishes Chart