Von Duprin 75-ALK-711-36 75 Series Alarmed Kit, 36in, 711/US19 Flat Black Powder-Coated

Von Duprin 75-ALK-711-36 75 Series Alarmed Kit offers a reliable solution to deter unauthorized access while still maintaining safe egress. This 36-inch alarm kit comes in a sophisticated flat black finish and features an internal horn that emits an 85-decibel alarm when the touch bar is activated, alerting you to any security breach. Designed for ease of use, the kit can be armed or disarmed using a standard 1-1/4" mortise cylinder key switch, allowing for versatile control over your security settings. The 75-ALK-711-36 includes a 24VDC input and external inhibit function, enabling remote arming and disarming capabilities. It operates on a standard 9-volt alkaline battery, with a low battery alert to ensure you’re always informed. The auto-reset option allows the alarm to resume after a preset time of 1.5, 3, or 4.5 minutes, enhancing its practicality. This alarm kit is compatible with the 75 Series Exit Device and is designed to be easily integrated into your existing security framework. The package also includes a clear 6" x 20" decal stating, "Emergency Exit Only. Alarm Will Sound," for added visibility. With the Von Duprin 75-ALK-711-36, you can enhance your security measures without compromising on accessibility.

75 Series Alarmed Kit, 36in, 711/US19 Flat Black Powder-Coated

Alarm kit (ALK) is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key thus allowing the exit device to be set in an armed or disarmed mode. The horn is rated at 85 decibels.

Features:

• For hardware applications, the assembly includes both a 24VDC input and external inhibit standard. The external inhibit provides remote arming and dis-arming.
• The key switch uses a standard 1-1/4" (32mm) mortise cylinder with a straight cam (Schlage 20-001, L583- 477 cam). The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal.
• Auto reset (AR) option is available with this kit. This kit allows the device to resume the alarm option after a preset time. Preset times can be field selected at 1.5, 3, or 4.5 minutes.
• Alarm kits are available with a choice of two switch kits, RX or LX. RX monitors the touchpad and is furnished standard. LX optional latch bolt monitoring is recommended for use with surface vertical rod exit devices or when alarm needs to sound from both the exit device and trim side of the door. Specify ALK-LX.
• The ALK includes a 6" x 20" decal for application on door "emergency exit only. Alarm will sound." RSS push bar trim can be used instead of the door decal, specify RSS push bar trim when ordering the device.
• When the ALK is used, standard dogging is removed. If cylinder dogging is required, there are two choices. Special center case dogging (SD) is available. Or, as an engineered special, the ALK can be moved to the hinge side of the device, and standard cylinder dogging (CD) can be added.

Minimum Door Opening Sizes on ALK Applications:

• 78/78-F/75/75-F:
• 3' (914mm) Length: 2' 11-1/2" (902mm)
• 4' (1219mm) Length: 3' 5-1/2" (1054mm)
• 7827/7827-F/7527/7527-F:
• 3' (914mm) Length: 2' 11-1/2" (902mm)
• 4' (1219mm) Length: 3' 5-1/2" (1054mm)
• 7847/7847-F/7547/7547-F:
• 3' (914mm) Length: 2' 10-1/2" (876mm)
• 4' (1219mm) Length: 3' 4-1/2" (1029mm)

Finishes:

• 605 - Bright brass
• 606 - Satin brass
• 612 - Satin bronze
• 619 - Satin nickel
• 625 - Bright chrome
• 626 - Satin chrome
• 628 - Aluminum, anodized
• 630 - Satin stainless steel
• 643e - Aged bronze
• 710 - Dark brown, anodized
• 711 - Matte black