ABH 019-LH 3/4" Offset Heavy Duty Intermediate Pivot, Left Hand, S1 (ALPC)

The ABH 019-LH 3/4" Offset Intermediate Pivot is a robust solution designed specifically for heavy-duty applications in doors 60" and taller. This intermediate pivot features a 3/4" offset design that ensures proper door alignment by mortising into the side jamb and hinge edge. In compliance with NFPA 80, Section 3-3.8, this pivot is essential for fire doors within the specified height range, with additional pivots required for every additional 30 inches. It is sold separately for most pivot sets and is included in sets 0165 and 0547.

Constructed from high-quality stainless steel, the 019-LH pivot is equipped with heavy-duty stainless steel needle bearings, ensuring durability and smooth operation. Its UL listing confirms compliance for use on 3-hour fire door assemblies, making it a reliable choice for commercial settings where safety is paramount.

The pivot comes in a sleek S1 (ALPC) finish, with additional finishes available to meet aesthetic preferences. Weighing an average of 2.5 lbs. per unit, this intermediate pivot is both lightweight and sturdy, making it an ideal choice for architects, contractors, and facility managers seeking dependable commercial door hardware.

Heavy duty intermediate pivot for doors 60" and taller with 3/4" offset, mortising into side jamb and hinge edge to maintain proper door alignment. NFPA 80, Section 3-3.8 requires some fire doors 60"-90" tall to have one intermediate pivot, with another intermediate for each additional 30" in height. Sold separately for most pivot sets, included in sets 0165 (qty 2) and 0547 (qty 2).

019-LH: Intermediate Pivot Only, 3/4" Offset, Left Hand

Key Features

• Door Alignment Support
• Stainless Steel Bearings
• UL Listed

Specifications

Handed - specify LH or RH. Required by NFPA 80 for fire doors 60" and taller. Sold separately for most pivot sets.

Features

• Door Alignment Support
• UL Listed
• Stainless Steel Bearings