Adams Rite 2190-312-203-10B Dual Force 2190 Interconnected System

Adams Rite 2190-312-203-10B Dual Force 2190 Interconnected Lock offers a robust solution for access control and security specifically designed for aluminum stile doors. With a backset of 1-1/8 inches and a striking dark bronze faceplate, this lock features an electrified square lever trim that combines the quick access of a latch with the security of a deadbolt. The interconnected design allows the key to retract both the deadbolt and deadlatch from either side, while the exterior lever activates the latch only. The inside lever is engineered for rapid egress, retracting both components simultaneously for panic-proof exiting, making it ideal for emergency situations. A holdback feature is included, allowing the latch to be held open with a simple turn of the key and sliding action. Constructed with a solid brass latchbolt and a stainless steel deadbolt, this lock is built to withstand wear and provide peace of mind. The faceplate measures 1 x 6-7/8 inches and adapts easily to various door edge styles. For optimal performance, it is recommended to use the specially designed strike included in the package. The Adams Rite 2190-312-203-10B is an essential choice for enhancing security in commercial environments.

Dual Force 2190 Interconnected

Dual Force Interconnected Lock, 1-1/8" Backset, Flat Strike, Dark Bronze Faceplate, Electrified 03 Square Lever Trim, Oil Rubbed Bronze

The Dual Force 2190 Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting. The Dual Force 2190 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only, while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors. Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release. 2190 will not work without its specially designed strike - included standard in package.

Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors.

• Cylinder Backset: 1-1/8” or 1-1/2” only.
• Latchbolt/Deadbolt: Latchbolt: 5/8” throw, solid brass. Easily reversible using only a screwdriver. Deadbolt: 1” throw, stainless steel.
• Auxiliary Deadlatch Pin: Stainless steel. Deadlocks latch bolt to prevent “loiding” or case-knife entry.
• Faceplates: Measures 1” x 6-7/8”. Include FaceStyle faceplate system that adapts to flat, radius, or beveled door edge. Radius with weatherseal faceplate available separately.
• Strikes: Standard strike furnished is the 2101-01 for flat jamb where door closes flush or nearly flush. The 2101 covers MS® Deadlock strike preparation with modification, and the 4901 Deadlatch strike directly. Also available in radius version for opposite stile pairs of doors and with extended lip strikes for special jamb conditions.
• Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
• Options: Specify trim option, lever style, finish, and strike.  Also adapts to paddle operator 4591. See 2290 for wood or steel door version for stile and rail type door construction. Note that the low profile trim (trim option 3) is recommended for in-swing door applications. Please refer to 3080 (TRIM) for full offering of designer handle sets.

Resources

• 2190 2290 Dual Force Interconnected Lock Cut Sheet
• 2190 Installation Instructions with Heavy Duty Entrance Lever Set
• 2290 Installation Instructions with Heavy Duty Entrance Lever Set
• 4600 Deadlatch Handle with 2190 Installation Instructions
• Mechanical to Electrical - Making the Jump
• Video: 2190 Interconnected Deadbolt/Deadlatch Installation
• What is Backset and How Do I Measure it?