Adams Rite 4300-2M-101-628 Steel Hawk 4300 eLatch

Adams Rite 4300-2M-101-628 4300 Steel Hawk eLatch is an advanced electrified deadlatch designed for both security and convenience in commercial applications. Featuring a non-handed, narrow backset design, this eLatch is compatible with standard aluminum entrance door preparations, ensuring easy integration into existing setups. The unit operates effortlessly from the inside via a handle or paddle device, while entry can be gained through a keyed mortise cylinder or access control element. This fail-secure lock is equipped with an optional form "C" latch status monitor, providing real-time feedback on the lock's status. The 4300 Steel Hawk operates on field-selectable voltages of 12, 16, or 24 DC, making it versatile for various environments. Constructed from steel with corrosion-resistant plating, the case measures 15/16" x 5-13/16" with a minimum door thickness requirement of 1-3/4". Included with the lock are both flat and radius faceplates, allowing for field adjustments to accommodate right or left beveled edge doors. The auxiliary bolt enhances security by preventing unauthorized entry methods. With its robust design and electrical reliability, the Adams Rite 4300 Steel Hawk eLatch is an exceptional choice for those seeking high-performance locking solutions.

4300 Steel Hawk eLatch

Steel Hawk Electrified Deadlatch, 31/32" Backset, Monitored, Surface Strike, Aluminum

The Steel Hawk 4300 Electrified Deadlatch (eLatch) combines non-handed, narrow backset, mechanical locking hardware with electrified access control. The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock with optional form "C" latch status monitor. The standard 4300 operates on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadlocks or 4500 and 4900 Deadlatches. 1-3/4" minimum door thickness required. Turn key, apply voltage, or operate handle or paddle to release the spring-loaded latchbolt. Electrically-rated for continuous duty for timed applications. Interface with access control. Uses any standard mortise cylinder with MS cam.

Combines non-handed, narrow backset, mechanical locking hardware with electrified access control.

• Cylinder Backset: 31/32”, 1-1/8”, and 1-1/2”
• Case: Measures 15/16” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 5/8” x 1” x 5/8” throw. Stainless steel.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• Faceplates: Measures 1” x 6-7/8”. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.
• Voltage: Field-selectable to match power source of 12, 16, or 24 VAC/VDC

Resources

• 4300 Catalog Page
• 4300 Series Electrified Deadlatch Installation Instructions
• 4300 Steel Hawk Electrified Deadlatch Cut Sheet
• 4600 Deadlatch Handle with 4300/4500/4900 Installation Instructions
• Mechanical to Electrical - Making the Jump
• Steel Hawk 4300 Electrified Latch Sell Sheet
• Video: 4300 Steel Hawk Electrified Deadlatch Installation
• What is Backset and How Do I Measure it?