Adams Rite 4300-30-217-628 Steel Hawk 4300 eLatch

Adams Rite 4300-30-217-628 4300 Steel Hawk eLatch offers a sophisticated solution for both security and access control in commercial settings. This electrified deadlatch is designed with a 1-1/8" backset, making it compatible with standard aluminum entrance door preparations. It features a non-handed design that ensures easy installation and operation, allowing consistent access through a keyed mortise cylinder or an access control element. The 4300 Steel Hawk is engineered for reliability, operating on 12, 16, or 24 volts DC and rated for continuous duty, making it ideal for timed applications. Its spring-loaded latchbolt, made from stainless steel, provides a robust 5/8" x 1" throw for enhanced security. An auxiliary bolt further protects against unauthorized entry, preventing "loiding" or case-knife attacks. With its 15/16" x 5-13/16" steel case featuring corrosion-resistant plating, the eLatch is built to withstand the rigors of daily use. Additionally, it includes both flat and radius faceplates that can be adjusted in the field, ensuring versatility for right or left beveled edge doors. The Adams Rite 4300 Steel Hawk eLatch represents a perfect blend of mechanical strength and electrified access control, making it an essential choice for professionals seeking reliable door hardware solutions.

4300 Steel Hawk eLatch

Steel Hawk Electrified Deadlatch, 1-1/8" Backset, Mortised Strike, Center Hung, 4" Jamb, Aluminum

The Steel Hawk 4300 Electrified Deadlatch (eLatch) combines non-handed, narrow backset, mechanical locking hardware with electrified access control. The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock with optional form "C" latch status monitor. The standard 4300 operates on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadlocks or 4500 and 4900 Deadlatches. 1-3/4" minimum door thickness required. Turn key, apply voltage, or operate handle or paddle to release the spring-loaded latchbolt. Electrically-rated for continuous duty for timed applications. Interface with access control. Uses any standard mortise cylinder with MS cam.

Combines non-handed, narrow backset, mechanical locking hardware with electrified access control.

• Cylinder Backset: 31/32”, 1-1/8”, and 1-1/2”
• Case: Measures 15/16” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 5/8” x 1” x 5/8” throw. Stainless steel.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• Faceplates: Measures 1” x 6-7/8”. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.
• Voltage: Field-selectable to match power source of 12, 16, or 24 VAC/VDC

Resources

• 4300 Catalog Page
• 4300 Series Electrified Deadlatch Installation Instructions
• 4300 Steel Hawk Electrified Deadlatch Cut Sheet
• 4600 Deadlatch Handle with 4300/4500/4900 Installation Instructions
• Mechanical to Electrical - Making the Jump
• Steel Hawk 4300 Electrified Latch Sell Sheet
• Video: 4300 Steel Hawk Electrified Deadlatch Installation
• What is Backset and How Do I Measure it?