Adams Rite 4300-3M-202-335 Steel Hawk 4300 eLatch

Adams Rite 4300-3M-202-335 4300 Steel Hawk eLatch is an advanced electrified deadlatch designed for commercial applications. This versatile unit features a 1-1/8" backset and a monitored mortised strike, making it ideal for standard aluminum entrance door preparations. The eLatch combines mechanical security with electrified access control, ensuring reliable performance while remaining operable from the inside via handle or paddle device. Designed for fail-secure operation, the 4300 eLatch allows entry through a keyed mortise cylinder or access control element. It is electrically rated for continuous duty, supporting 12, 16, or 24 volt DC power. Installation is straightforward, thanks to a quick connect plug-in type connector, and it can be replaced without altering the door stile. This deadlatch features a robust stainless steel latchbolt with a 5/8" throw, while the auxiliary bolt provides additional protection against unauthorized entry. With both flat and radius faceplates included, compatibility with right or left beveled edge doors is achievable through field adjustments. The Adams Rite 4300 Steel Hawk eLatch is a reliable choice for enhancing security in commercial settings.

4300 Steel Hawk eLatch

Steel Hawk Electrified Deadlatch, 1-1/8" Backset, Monitored, Mortised Strike, Radius, Black

The Steel Hawk 4300 Electrified Deadlatch (eLatch) combines non-handed, narrow backset, mechanical locking hardware with electrified access control. The 4300 eLatch combines mechanical locking hardware with electrified access control while working within standard aluminum entrance door preparations. Always operable from the inside via handle or paddle device. Entry via keyed mortise cylinder or access control element. Fail-secure lock with optional form "C" latch status monitor. The standard 4300 operates on 12, 16, or 24 volt DC power and is rated for continuous duty. Units are equipped with a quick connect plug-in type connector. Interchangeable without stile modification for MS Deadlocks or 4500 and 4900 Deadlatches. 1-3/4" minimum door thickness required. Turn key, apply voltage, or operate handle or paddle to release the spring-loaded latchbolt. Electrically-rated for continuous duty for timed applications. Interface with access control. Uses any standard mortise cylinder with MS cam.

Combines non-handed, narrow backset, mechanical locking hardware with electrified access control.

• Cylinder Backset: 31/32”, 1-1/8”, and 1-1/2”
• Case: Measures 15/16” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 5/8” x 1” x 5/8” throw. Stainless steel.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• Faceplates: Measures 1” x 6-7/8”. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.
• Voltage: Field-selectable to match power source of 12, 16, or 24 VAC/VDC

Resources

• 4300 Catalog Page
• 4300 Series Electrified Deadlatch Installation Instructions
• 4300 Steel Hawk Electrified Deadlatch Cut Sheet
• 4600 Deadlatch Handle with 4300/4500/4900 Installation Instructions
• Mechanical to Electrical - Making the Jump
• Steel Hawk 4300 Electrified Latch Sell Sheet
• Video: 4300 Steel Hawk Electrified Deadlatch Installation
• What is Backset and How Do I Measure it?