Adams Rite 4510-35-201-313 Standard Duty Deadlatch, Flat Faceplate, 1-1/8" Backset, Dark Bronze Finish

Adams Rite 4510-35-201-313 Standard Duty Deadlatch combines security and flexibility, making it an ideal choice for various commercial applications. Designed with a flat faceplate and a guarded latch, this deadlatch features a 1-1/8" backset and comes equipped with a 2-5/8" mortise strike. Its dark bronze anodized aluminum finish not only enhances durability but also adds a sophisticated touch. This deadlatch allows for two-way traffic control-perfect for environments such as hospitals and banks where access needs may vary throughout the day. A unique reverse turn of the key while the bolt is retracted retains the bolt, facilitating seamless movement when necessary. The all-metal latch bolt, reinforced with hardened steel internal pins, provides an extra layer of protection against forced entry. Installation is straightforward, as the handing is reversible without requiring special tools. The lock case is constructed from steel with corrosion-resistant plating, ensuring longevity. It accommodates standard mortise cylinders and is packaged with a standard strike and machine screws for easy mounting. With a limited warranty of five years, the Adams Rite 4510 Series Deadlatch is a trusted solution for achieving both security and convenience in commercial door hardware.

Standard Duty Deadlatch, Flat Faceplate, Guarded Latch, 1-1/8" Backset, 2-5/8" Mortise Strike, Dark Bronze Anodized Aluminum Finish, Left-Handed or Right Hand Reverse

Standard Duty Deadlatch, Flat Faceplate, Guarded Latch, 1-1/8" Backset, 2-5/8" Mortise Strike, Dark Bronze Anodized Aluminum Finish, Left-Handed or Right Hand Reverse

Flexibility of traffic control during and after business hours is offered by 4510 Series Deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt, to allow two way traffic for hospitals, banks, and other buildings which require free entrance at certain times and exit only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S deadbolt of same backset and faceplate shape. (They do not, however, provide the same maximum security level as the MS Deadbolt.) Lock case is steel with corrosion-resistant plating. Available in four cylinder backsets, 7/8 In., 31/32 In., 1-1/8 In. or 1-1/2 In.. All metal latch bolt with hardened steel internal pins. Handing is reversible without special tools. All metal auxiliary bolt deadlocks latch bolt to prevent "loiding" or case-knife entry. Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush. Also available: radius strike for opposite stile in paired doors; longer strike (4901) to cover slot strike of MS lock; long lip strikes for centerhung doors. Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS cam. Individually boxed with strike and machine screws for mounting. Cylinders, paddle or handle available at extra cost.