Adams Rite 4531-35-201-313 Retrofit DeadLatch 1-1/8" Backspring

Adams Rite 4531-35-201-313 Retrofit DeadLatch is a standard-duty solution designed for effective traffic control in various commercial environments. Featuring a radius faceplate and a 1-1/8 inch backset, this deadlatch is compatible with existing stile cutouts for older MS1850 Deadlocks and discontinued 4250 Deadlatches, ensuring a seamless retrofit without the need for alterations. The innovative design allows for two-way traffic control; a reverse turn of the key while the bolt is retracted retains the bolt, making it ideal for settings like hospitals, banks, and retail stores that require flexible access. With a robust steel construction and corrosion-resistant plating, the deadlatch boasts a durable case measuring 1 inch x 5-13/16 inches, and a reliable latchbolt with a 1/2 inch throw. Installation is straightforward with the included standard strike (4901-01) for flat jambs, and it accommodates any standard mortise cylinder with MS cam. The 4531-35-201-313 is field-reversible, allowing for easy adjustments to the handing, and comes with all necessary mounting hardware. Additionally, it carries a limited 5-year warranty, ensuring lasting performance and reliability.

Retrofit DeadLatch 1-1/8 Backs

Standard Duty Retrofit Deadlatch, Radius Faceplate, 1-1/8 In. Backset, 2-5/8 In. Flat Mortised Strike, LH or RHR, Dark Bronze Anodized

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. 4530 Deadlatches are designed to fit without alteration, the stile cutout for older MS1850 Deadlocks and discontinued 4250 Deadlatches of same backset. Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS cam. Standard strike furnished is 4901-01 for flat jamb. Available in three cylinder backsets, 7/8 In., 31/32 In. and 1-1/8 In.. Individually boxed with strike and machine screws for mounting. Cylinders, paddles, and handles available separately.

Designed to retrofit into the prep of older MS1850 Deadlocks and 4250 Deadlatches.

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times.

• Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
• Cylinder Backset: 7/8”, 31/32”, or 1-1/8” only
• Case: Measures 1” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 1/2” x 1” x 1/2” throw. All metal with hardened steel internal pins. Handing is reversible without special tools.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• FaceplateF: Measures 1-1/4” x 7-13/32”.
• Strikes: Standard strike furnished is 4901-01 for flat jamb. For dimensions of this as well as radiused and/or short strikes see ACCESSORIES.
• Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
• Options: Backset, faceplate shape, strike, handing, and finish must be specified when ordering. For information on handles and paddles see TRIM.
• Standard Package: Individually boxed with strike and machine screws for mounting. Cylinders, paddles, and handles available separately. Shipping weight: 1-1/4 lbs.

Resources

• 4510/4530 Series Deadlatch Installation Instructions
• 4510/4530 Series Re-handing Instructions
• 4530 Catalog Page
• 4530 Standard Duty Deadlatch Cut Sheet
• What is Backset and How Do I Measure it?