Adams Rite 4532-35-101-313 Retrofit DeadLatch 1-1/8" Backspring

Adams Rite 4532-35-101-313 Retrofit DeadLatch combines functionality with security to enhance traffic control in commercial settings. Designed for ease of use, this standard duty deadlatch features a radius faceplate and a 1-1/8 inch backset, making it compatible with existing installations of older MS1850 Deadlocks and discontinued 4250 Deadlatches. The robust construction includes a steel case with corrosion-resistant plating, ensuring durability over time. The unique bolt holdback feature allows for two-way traffic control; a reverse turn of the key retains the bolt when held retracted, granting free access during designated hours. This is especially beneficial for hospitals, banks, and retail environments, where managing entrance and exit is crucial. The 4532 deadlatch accommodates any standard mortise cylinder with an MS cam, providing flexibility in locking options. Measuring 1-1/4 inches by 7-13/32 inches, the faceplate pairs with a 4-5/8 inch flat mortised strike, included in the package along with machine screws for straightforward installation. Available in dark bronze anodized finish, this retrofit deadlatch not only enhances security but also complements a variety of architectural styles. With a limited five-year warranty, you can trust in the quality and reliability of Adams Rite's craftsmanship.

Retrofit DeadLatch 1-1/8 Backs

Standard Duty Retrofit Deadlatch, Radius Faceplate, 1-1/8 In. Backset, 4-5/8 In. Flat Mortised Strike, LH or RHR, Dark Bronze Anodized

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. 4530 Deadlatches are designed to fit without alteration, the stile cutout for older MS1850 Deadlocks and discontinued 4250 Deadlatches of same backset. Turn key or operate handle to retract spring-loaded Latchbolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS cam. Standard strike furnished is 4901-01 for flat jamb. Available in three cylinder backsets, 7/8 In., 31/32 In. and 1-1/8 In.. Individually boxed with strike and machine screws for mounting. Cylinders, paddles, and handles available separately.

Designed to retrofit into the prep of older MS1850 Deadlocks and 4250 Deadlatches.

The 4530 Standard Duty Deadlatch offers flexibility of traffic control during and after business hours. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times.

• Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.
• Cylinder Backset: 7/8”, 31/32”, or 1-1/8” only
• Case: Measures 1” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating.
• Latchbolt: 1/2” x 1” x 1/2” throw. All metal with hardened steel internal pins. Handing is reversible without special tools.
• Auxiliary Bolt: All metal. Deadlocks latchbolt to prevent “loiding” or case-knife entry.
• FaceplateF: Measures 1-1/4” x 7-13/32”.
• Strikes: Standard strike furnished is 4901-01 for flat jamb. For dimensions of this as well as radiused and/or short strikes see ACCESSORIES.
• Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
• Options: Backset, faceplate shape, strike, handing, and finish must be specified when ordering. For information on handles and paddles see TRIM.
• Standard Package: Individually boxed with strike and machine screws for mounting. Cylinders, paddles, and handles available separately. Shipping weight: 1-1/4 lbs.

Resources

• 4510/4530 Series Deadlatch Installation Instructions
• 4510/4530 Series Re-handing Instructions
• 4530 Catalog Page
• 4530 Standard Duty Deadlatch Cut Sheet
• What is Backset and How Do I Measure it?