Command PD15-M-EU24V-CVR-48-628-REX RHR 24V Electrified CVR Exit Device, REX, 48in, RHR Right Hand, 628/Alum

Command Access PD15-M-EU24V-CVR-48-628-REX RHR is a top-tier motorized latch retraction exit device designed for storefront applications in commercial and institutional settings. This 24V electrified concealed vertical rod (CVR) device features a Request to Exit (REX) function, enhancing security while ensuring easy access. With its sleek aluminum finish, it integrates seamlessly into modern architectural designs. Equipped with innovative PTS "push to set" technology, this device allows for a quick, one-second electronic adjustment post-installation, making it user-friendly for building professionals. The MM5 Smart Module provides on-board diagnostics with audible feedback, ensuring any power or adjustment issues are easily identified. The low current draw is compatible with most 24VDC, 1.5A regulated power supplies, facilitating long wire runs up to 300 feet. The PD15-M series boasts electric dogging rated for continuous duty, which automatically re-engages if pulled from the dogged position. It maintains factory dogging and is designed to retrofit existing models, eliminating the need for door removal during installation. With a 3-year "no hassle" warranty, you can trust in the reliability and performance of this exceptional exit device. Suitable for narrow, medium, and wide stile aluminum doors, the PD15-M is the ideal choice for any high-traffic environment.

Motorized Latch Retraction, 24V (EU) Electrified Concealed Vertical Rod (CVR) Exit Device, Request to Exit (REX), 48in, RHR Right Hand Reverse, 628/Alum Aluminum Painted

The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS "push to set" technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle" warranty, meaning we will support you.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• "PTS": 1 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
• Up to 300’ with 2-18ga -- long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
• 8" cable with Quick connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging
• 3-year "no hassle" warranty - longer than the traditional 1 year warranty because our stuff works!
• Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices
• Motorized latch retraction w/ easy adjustment
• Long wire runs w/18ga - no need for specialty power supply right above the door.

Models:

• PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• PD15-M-CVR: Complete CVR device, specify handing - LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• Sub PD16: for mechanical devices

Specifications:

• System protection: unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak: 900mA, average current hold: 250mA
• PTS adjustment: approx. 1/4"
• 300’ Run w/ 18ga
• Handing: Rim device is non-handed. CVR device is handed.
• Door Thickness: Suits 1-3/4" standard
• Projection: 2-5/8" when fully projected, 1-5/8"when dogged.
• Stile Width: Minimum 2" stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws
• Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
• Push bar Length: Standard size: dimensioned for 36" and 48" openings. Standard width bars can be field cut to: 36/48" - 7" of filler plate needed

Accessories:

• Request to Exit (REX): Switch available factory installed
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field