Command PD16-CVR-36-313-REX RHR CVR Exit Device REX 36in RHR Right Hand Reverse 313 Duro Dark Bronze

Command Access PD16-CVR-36-313-REX RHR Mechanical Concealed Vertical Rod (CVR) Exit Device offers a robust and reliable solution for commercial and institutional environments. Designed for right-hand reverse (RHR) applications, this exit device features a sleek, low-profile design that fits narrow-style doors, making it an excellent choice for modern building aesthetics. One of the standout features of the PD16-CVR is its Request to Exit (REX) capability, which allows for seamless egress in emergency situations. The device is equipped with top and bottom steel rods for easy adjustment, ensuring a secure fit for doors with a standard thickness of 1-3/4 inches. Additionally, the electric dogging function enables continuous duty and auto re-engagement when pulled from the dogged position, enhancing security without sacrificing convenience. Installation is simplified with the device’s compatibility with existing mounting locations, specifically designed to retrofit Jackson 1285/95 and Kawneer 1686/1786 series models. With a 3-year "no hassle" warranty, the PD16-CVR reflects Command Access's commitment to quality and performance. Specifications include a projection of 2-5/8 inches when fully projected and an average current peak of 900mA, making it a reliable choice for high-traffic areas. Upgrade your building's safety with the Command Access PD16-CVR-36-313-REX RHR.

Mechanical Concealed Vertical Rod (CVR) Exit Device, Request to Exit (REX), 36in, RHR Right Hand Reverse, 313/Duro Dark Bronze Painted

The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS "push to set" technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle" warranty, meaning we will support you.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• "PTS": 1 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
• Up to 300’ with 2-18ga -- long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
• 8" cable with Quick connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging
• 3-year "no hassle" warranty - longer than the traditional 1 year warranty because our stuff works!
• Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices
• Motorized latch retraction w/ easy adjustment
• Long wire runs w/18ga - no need for specialty power supply right above the door.

Models:

• PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• PD15-M-CVR: Complete CVR device, specify handing - LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• Sub PD16: for mechanical devices

Specifications:

• System protection: unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak: 900mA, average current hold: 250mA
• PTS adjustment: approx. 1/4"
• 300’ Run w/ 18ga
• Handing: Rim device is non-handed. CVR device is handed.
• Door Thickness: Suits 1-3/4" standard
• Projection: 2-5/8" when fully projected, 1-5/8"when dogged.
• Stile Width: Minimum 2" stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws
• Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
• Push bar Length: Standard size: dimensioned for 36" and 48" openings. Standard width bars can be field cut to: 36/48" - 7" of filler plate needed

Accessories:

• Request to Exit (REX): Switch available factory installed
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field