Command PD16-CVR-36-628-REX LHR CVR Exit Device REX 36in LHR Left Hand Reverse 628/Alum Aluminum Painted

Command Access PD16-CVR-36-628-REX LHR Mechanical Concealed Vertical Rod (CVR) Exit Device offers a robust solution for secure and efficient egress in commercial environments. Designed for left-hand reverse applications, this exit device boasts a sleek, low-profile aluminum finish that complements modern architecture while ensuring durability and functionality. Equipped with a Request to Exit (REX) feature, the PD16-CVR simplifies access control, allowing for seamless exit with a gentle push. The device is compatible with standard door thicknesses of 1-3/4" and fits narrow, medium, and wide stile aluminum doors, making it versatile for various installations. The vertical rods are crafted from steel for reliable performance and can be easily adjusted to accommodate nominal door heights. With a standard projection of 2-5/8" and electric dogging capabilities, this exit device ensures secure closure while maintaining ease of operation. The PD16-CVR also supports long wire runs of up to 300 feet with 18-gauge wire, allowing for centralized power supply placement, enhancing installation efficiency. Backed by a 3-year "no hassle" warranty, the Command Access PD16-CVR-36-628-REX LHR is a dependable choice for building professionals looking to enhance security without compromising on accessibility.

Mechanical Concealed Vertical Rod (CVR) Exit Device, Request to Exit (REX), 36in, LHR Left Hand Reverse, 628/Alum Aluminum Painted

The PD15-M series is a motorized latch pullback grade 1 storefront exit device; made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS "push to set" technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year "no hassle" warranty, meaning we will support you.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• "PTS": 1 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1.5A (or greater) regulated & linear power supplies
• Up to 300’ with 2-18ga -- long wire runs with provides installer with convenience of placing the locking device power supply in a centralized location; i.e. the same closet as the access panel
• 8" cable with Quick connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging
• 3-year "no hassle" warranty - longer than the traditional 1 year warranty because our stuff works!
• Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices
• Motorized latch retraction w/ easy adjustment
• Long wire runs w/18ga - no need for specialty power supply right above the door.

Models:

• PD15-M-RIM: Complete rim device, non-handed, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• PD15-M-CVR: Complete CVR device, specify handing - LHR or RHR, motorized latch retraction, w/electric dogging. Specify alum or Duro finish. 24V only
• Sub PD16: for mechanical devices

Specifications:

• System protection: unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak: 900mA, average current hold: 250mA
• PTS adjustment: approx. 1/4"
• 300’ Run w/ 18ga
• Handing: Rim device is non-handed. CVR device is handed.
• Door Thickness: Suits 1-3/4" standard
• Projection: 2-5/8" when fully projected, 1-5/8"when dogged.
• Stile Width: Minimum 2" stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws
• Vertical Rods: Top and bottom steel rods for easy adjustment. Standard device is adjustable for nominal door heights
• Push bar Length: Standard size: dimensioned for 36" and 48" openings. Standard width bars can be field cut to: 36/48" - 7" of filler plate needed

Accessories:

• Request to Exit (REX): Switch available factory installed
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field