CRL 2600 1/8" Prismatic Glass DrillC.R. Laurence 2600 1/8" Prismatic Glass Drill is the premier choice for professionals in the flat glass industry. Designed for precision, this drill features tungsten carbide tips that ensure durability and the capability to produce hundreds of high-quality holes without the need for frequent re-sharpening. Its precision-ground design on three sides allows for exceptional performance, making it an essential tool for any glass drilling machine, including the CRL2 and SDM4 models. With a shank diameter of 1/4 inch and a reduced round shank type, this drill operates efficiently at speeds between 400 to 600 RPM. The unique tip design is angled to initially scratch the surface of the glass, facilitating a smooth drilling process. To maintain optimal performance, be sure to use a coolant, such as CRL DTC80, during operation. Safety is paramount when drilling glass; therefore, always wear appropriate protective gear, including gloves and eye protection. Work on a flat, horizontal surface, and utilize a Ground Fault Circuit Interrupter (GF1) when using electric tools with water or coolant. The C.R. Laurence 2600 Prismatic Glass Drill is a reliable investment for achieving precise and professional results in glass drilling applications.
1/8" Prismatic Glass Drill
- Our Best Carbide Drill
- Precision Ground on Three Sides
- Available Sizes from 1/8" to 1/2" (3 to 12.7 mm)
This
CRL Prismatic Glass Drill is the standard of quality for glass drilling throughout the flat glass industry. The tungsten carbide tips mean you can produce hundreds of high quality holes without needing to re-sharpen the drill. The extra long tip assures long lasting, precision drilling.
Prismatic Drills should only be used in glass drilling machines such as the CRL2, SDM4, and 41, or in a securely held electric drill. We do not recommend you use them with hand brace drills. Be sure to keep the drill cool using a coolant, such as CRL DTC80 during drilling.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
These drills should be run at 400-600 RPM to achieve maximum drilling performance. The tip of the CRL Prismatic Drill is not ground to a sharp point. There is a slight angle at the tip to allow the drill to first scratch the glass and begin the drilling of the hole.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Drill Bit Size: 1/8 in. (3 mm)
Material: Carbide
Shank Diameter: 1/4 in. (6 mm)
Shank Type: Reduced Round
Shipping Limitations: None
Speed: 500-600
Works On: CRL2 And SDM4
