CRL 2602 3/16" Prismatic Glass DrillC.R. Laurence 2602 3/16" Prismatic Glass Drill is the premier choice for professionals in the flat glass industry, renowned for its exceptional quality and durability. Featuring precision-ground carbide tips, this drill allows users to create hundreds of high-quality holes without the need for frequent re-sharpening. The extended tip design ensures consistent and precise drilling, maximizing performance during glass applications. Designed specifically for use in glass drilling machines such as the CRL2, SDM4, and 41, this drill is not recommended for hand brace drills. Maintaining the drill's performance is crucial; therefore, it is advised to use a coolant like CRL Cat. No. PGT1 Pure Gum Turpentine or CRL DTC80 to keep the drill cool during operation. To achieve optimal results, operate the drill at speeds between 400-600 RPM. Safety is paramount when using the CRL Prismatic Drill; always wear appropriate safety gear, including gloves and eye protection. Ensure the work is performed on a stable, flat surface and utilize a Ground Fault Circuit Interrupter when operating electric tools with coolant. With a shank diameter of 1/4" and a drill bit size of 3/16" (5 mm), the C.R. Laurence 2602 Prismatic Glass Drill is an essential tool for any glazing professional looking to achieve high-quality results efficiently.
3/16" Prismatic Glass Drill
- Our Best Carbide Drill
- Precision Ground on Three Sides
- Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
This
CRL Prismatic Glass Drill is the standard of quality for glass drilling throughout the flat glass industry. The tungsten carbide tips mean you can produce hundreds of high quality holes without needing to re-sharpen the drill. The extra long tip assures long lasting, precision drilling.
Prismatic Drills should only be used in glass drilling machines such as the CRL2, SDM4, and 41, or in a securely held electric drill. We do not recommend you use them with hand brace drills. Be sure to keep the drill cool using CRL Cat. No. PGT1 Pure Gum Turpentine or another coolant, such as CRL DTC80 during drilling.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
These drills should be run at 400-600 RPM to achieve maximum drilling performance. The tip of the CRL Prismatic Drill is not ground to a sharp point. There is a slight angle at the tip to allow the drill to first scratch the glass and begin the drilling of the hole.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Drill Bit Size: 3/16 in. (5 mm)
Material: Carbide
Shank Diameter: 1/4 in. (6 mm)
Shank Type: Reduced Round
Shipping Limitations: None
Speed: 500-600
Works On: CRL2 And SDM4
