CRL 2604 1/4" Prismatic Glass DrillC.R. Laurence 2604 1/4" Prismatic Glass Drill sets the standard for quality glass drilling in the flat glass industry. Designed with precision in mind, this drill features tungsten carbide tips that guarantee high performance, allowing you to create hundreds of clean holes without the need for frequent re-sharpening. The extra-long tip ensures longevity and accuracy during drilling operations. Ideal for use with glass drilling machines like the CRL2 and SDM4, this drill is not recommended for hand brace drills. To achieve optimal results, operate the drill at speeds between 400-600 RPM. The drill's unique tip design features a slight angle that first scratches the glass before drilling begins, enhancing overall efficiency. Safety is paramount when using the C.R. Laurence Prismatic Glass Drill. Always wear appropriate safety gear, including gloves and eye protection, and work on a flat, stable surface. When using coolant, such as CRL DTC80, ensure the integration of a Ground Fault Circuit Interrupter (GFCI) for added protection. With a shank diameter of 1/4" (6 mm) and a reduced round shank type, this drill is both versatile and durable, making it an essential tool for any professional in the glass drilling industry.
1/4" Prismatic Glass Drill
- Our Best Carbide Drill
- Precision Ground on Three Sides
- Available Sizes from 1/8" to 1/2" (3.2 to 12.7 mm)
This
CRL Prismatic Glass Drill is the standard of quality for glass drilling throughout the flat glass industry. The tungsten carbide tips mean you can produce hundreds of high quality holes without needing to re-sharpen the drill. The extra long tip assures long lasting, precision drilling.
Prismatic Drills should only be used in glass drilling machines such as the CRL2, SDM4, and 41, or in a securely held electric drill. We do not recommend you use them with hand brace drills. Be sure to keep the drill cool using a coolant, such as CRL DTC80 during drilling.
NOTE: Always wear the proper safety gear, including gloves and eye protection, when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter, such as CRL Cat. No. GF1, must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Product Warning:
These drills should be run at 400-600 RPM to achieve maximum drilling performance. The tip of the CRL Prismatic Drill is not ground to a sharp point. There is a slight angle at the tip to allow the drill to first scratch the glass and begin the drilling of the hole.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Drill Bit Size: 1/4 in. (6 mm)
Material: Carbide
Shank Diameter: 1/4 in. (6 mm)
Shank Type: Reduced Round
Shipping Limitations: None
Speed: 500-600
Works On: CRL2 And SDM4
