Minimum order $100 · Orders $100–$149.99 include a small-order fee ($20 down to $8) · No fee from $150
  1. Home
  2. Shopping Cart
CRL 33PTW DAP '33' White Glazing Compound - Pint
Images may not represent actual product and finish

CRL 33PTW DAP '33' White Glazing Compound - Pint

Your Price: $18.45
Retail Price:$22.08
Your Savings:$3.63(16%)
CRL DAP '33' Glazing Compound offers a smooth, ready-to-use formula for wood and metal sash, ensuring durable, watertight seals.
Part Number : CRL_33PTW
Availability: 116 In Stock
CRL 33PTW DAP '33' White Glazing Compound - Pint

CRL 33PTW White DAP '33' Glazing Compound - Pint is a ready-to-use solution specifically designed for face glazing wood and metal sash windows. This high-performance glazing compound features a smooth, creamy consistency that ensures an effortless application, providing excellent adhesion to both glass and sash. Once applied, it forms a reliable air and watertight seal, effectively resisting sagging, shrinking, chalking, and cracking. For optimal results, surfaces must be clean, dry, and free of frost prior to application. When re-glazing, it's essential to remove all old putty and bedding. For wood sash that isn't primed or painted, an oil-based primer must be applied beforehand. The compound should be laid down in a thin layer (approximately 1/8" thick) to establish a solid back bedding for the glass. Keep in mind that the putty requires painting after it has skinned over and reached a firm set, with a typical drying time of one to two weeks depending on environmental conditions. Use a high-quality oil-based paint, or if opting for latex, first prime with an oil-based primer. Note that this product should not be used on plastic window panes or for stained/leaded glass projects.

White DAP '33' Glazing Compound - Pint

  • Ready to Use for Wood and Metal Sash
  • Smooth Creamy Consistency
  • Must Be Painted

CRL DAP® '33'® Glazing Compound is smooth and flexible, and comes ready-to-use for face glazing wood and metal window frames. Its adhesion to both glass and sash is excellent, forming a dependable air and watertight seal that resists sagging, shrinking, chalking, and cracking.


SURFACE PREPARATION & APPLICATION
Separation occurs in glazing Putty; mix entire contents of container until completely uniformed before the application. If necessary, roll into coils to warm and soften.
  • *Surfaces should be clean, dry, and free of frost. When re-glazing, remove all old putty and bedding.
  • *Wood sash that is not primed or painted must be primed first with an oil-based primer and allowed to dry. When re-glazing, remove all old putty and bedding.
  • * Apply a thin layer of DAP® ‘33’® Glazing (about 1/8" thick) to backstop of sash to provide back-bedding where glass is to be set.
  • * For metal sash, use spacer shims at quarter points to maintain 1/8" minimum bedding thickness. There should be no metal or wood to glass contact.
  • *Smooth glazing to an angle that sheets water with a putty knife.
  • *Typical dry time before painting is one to two weeks, depending on temperature and humidity.
  • *Putty must be painted after it has skinned over and attained a firm set. Typical dry time before painting is one to two weeks, depending on temperature and humidity.
  • *For best results, use a high quality oil-based paint, or if using a latex paint, prime first with a high quality oil-based primer.


    Product Warning:
    • Do not thin glazing compound.
    • Do not apply when air or sash temperatures are below 40ºF (4ºC).
    • Do not use on plastic window panes, insulating glass units with an organic seal, any window pane over 48" (1.22 m) in length, or metal sash with rabbets over 1-1/4" (32 mm) wide.
    • Also not recommended for stained/leaded glass projects.
    • Clean tools immediately after use with mineral spirits.

    Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.


    • Attributes

    Ship via: No UPS - Common Carrier Only

    Brand: DAP® '33'®

    Case Quantity: 12

    Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov

    Contents: 16 oz.(473.2 ml)

    Finish/ Color:: White

    For Use On: Wood And Metal Sash

    Shelf Life: 12 Months

    Shipping Limitations: None

    Texture: Smooth Creamy Consistency

    Resources

    Browse Similar Items

    Recently Viewed Items

    TOP Logo