CRL C2020 Water Spot Remover - 1 Gallon

CRL C2020 Water Spot Remover - 1 Gallon

C.R. Laurence C2020 Water Spot Remover - Gallon Bottle is the ultimate solution for glazing professionals and window cleaning contractors facing the challenges of water spotting caused by hard water, acid rain, and other corrosive elements. This specialized formula effectively removes alkaline residues and mineral deposits from uncoated clear and float surfaces, restoring optical clarity to glass that has become hazy or dull. Designed to tackle Stage I Corrosion, the C2020 Water Spot Remover works by dissolving stubborn mineral deposits embedded in the rough pits and ridges of the glass surface. Its acid-based composition ensures thorough cleaning without leaving any residue that could redeposit later. This powerful cleaner is not suitable for consumer use, automotive glass, or coated surfaces like self-cleaning glass, making it essential for professionals who demand high-quality results. Available in both gallon and quart sizes, this product is perfect for those requiring a reliable solution for maintaining glass clarity in various environments. Note that while it excels in removing light corrosion, it cannot repair glass affected by Stage II Corrosion. For optimal safety and effectiveness, always consult the product label and Material Safety Data Sheet prior to use.

Water Spot Remover - Gallon Bottle

• CRL Finally Solves the Problem of Water Spotting From Sprinklers, Hard Water Sources and Exposure to Acid Rain
• Available in Gallon and Quart Sizes
• Removes Alkaline Residue, Chemical and Mineral Deposits from Uncoated Clear and Float Surfaces (Typical Stage I Corrosion)

CRL Water Spot Remover is specifically formulated for use by professional window cleaning contractors and glazing professionals. It is designed to remove any residue left on glass which may alter the optical clarity, and can not be cleaned using standard methods. CRL Water Spot Remover will make glass clear again if it has turned hazy due to caustic and corrosive air pollution, acid rain, auto exhaust, hard water deposits, corrosive cleaning materials, dust and dirt residues. It works by dissolving mineral deposits from the surface of the glass, and prevents their redeposit later. Because < CRL Water Spot Remover is an acid-based product, it has the ability to dissolve deposits found in the rough pits and ridges of the glass surface, leaving it looking almost like new.


Stage I Corrosion is defined as glass with light corrosion, with little or no damage to the glass. Stage II Corrosion occurs when the deposits are no longer on the surface of the glass, but have started to break down the molecular structure of the glass, leaving an etched or white haze on the glass after the stain has been removed. CRL Water Spot Remover will not repair glass with Stage II Corrosion.


Product Warning:

This product is for use only by glazing professionals. It is not intended or recommended for consumer use, for use on automotive glass, or for use on the coated sides of chemically-treated glass including self-cleaning glass.

Check label and Material Safety Data Sheet for any additional limitations and warnings.

Resources

• C2020 Usage Instructions
• Water Spot Remover Safety Data Sheet