CRL C2030 Water Spot Remover - Quart

CRL C2030 Water Spot Remover - Quart

C.R. Laurence C2030 Water Spot Remover - Quart Bottle is the ultimate solution for glazing professionals tackling stubborn water spots caused by hard water sources, sprinklers, and even acid rain. Available in both gallon and quart sizes, this powerful formula is specially crafted to eliminate alkaline residues and mineral deposits from uncoated clear and float glass surfaces, effectively addressing typical Stage I corrosion. This acid-based remover dissolves mineral deposits embedded in the rough pits and ridges of the glass, restoring optical clarity to surfaces that may have become hazy due to environmental factors like auto exhaust and corrosive cleaning materials. It is essential for professional window cleaning contractors who require a reliable product that goes beyond standard cleaning methods. It is important to note that C.R. Laurence Water Spot Remover is not intended for consumer use or for application on automotive glass and chemically-treated surfaces, such as self-cleaning glass. Understanding its limitations is crucial, as it will not repair glass with Stage II corrosion, which indicates deeper structural damage. With a convenient 32 oz. (946.4 ml) bottle size, this product is designed for professional use, ensuring glass maintains its clarity and aesthetic appeal. For best results, always refer to the label and Material Safety Data Sheet for guidelines and precautions.

Water Spot Remover - Quart Bottle

• CRL Finally Solves the Problem of Water Spotting From Sprinklers, Hard Water Sources and Exposure to Acid Rain
• Available in Gallon and Quart Sizes
• Removes Alkaline Residue, Chemical and Mineral Deposits From Uncoated Clear and Float Surfaces (Typical Stage I Corrosion)

CRL Water Spot Remover is specifically formulated for use by professional window cleaning contractors and glazing professionals. It is designed to remove any residue left on glass which may alter the optical clarity, and can not be cleaned using standard methods. CRL Water Spot Remover will make glass clear again if it has turned hazy due to caustic and corrosive air pollution, acid rain, auto exhaust, hard water deposits, corrosive cleaning materials, dust and dirt residues. It works by dissolving mineral deposits from the surface of the glass, and prevents their redeposit later. Because CRL Water Spot Remover is an acid-based product, it has the ability to dissolve deposits found in the rough pits and ridges of the glass surface, leaving it looking almost like new.


Stage I Corrosion is defined as glass with light corrosion, with little or no damage to the glass. Stage II Corrosion occurs when the deposits are no longer on the surface of the glass, but have started to break down the molecular structure of the glass, leaving an etched or white haze on the glass after the stain has been removed. CRL Water Spot Remover will not repair glass with Stage II Corrosion.


Product Warning:

This product is for use only by glazing professionals. It is not intended or recommended for consumer use, for use on automotive glass, or for use on the coated sides of chemically-treated glass including self-cleaning glass.

Check label and Material Safety Data Sheet for any additional limitations and warnings.

Resources

• C2030 Usage Instructions
• Water Spot Remover Safety Data Sheet