CRL GEN344CH Chrome Adjustable Wall Mount Offset Back Plate Hinge

CRL GEN344CH Chrome Adjustable Wall Mount Offset Back Plate Hinge

C.R. Laurence GEN344CH Polished Chrome Adjustable Wall Mount Offset Back Plate Hinge offers a sophisticated solution for your shower door installations. This innovative hinge allows for adjustment to any angle up to 90 degrees without the need to remove the door, simplifying the installation process. Once the door is hung, simply loosen the Allen set screws to achieve the desired closed position, and re-tighten to ensure the door self-centers perfectly. Crafted from solid brass, the GEN344CH is not only durable but also available in a polished chrome finish that enhances any bathroom aesthetic. Designed for monolithic tempered glass, this hinge accommodates glass thicknesses from 5/16" to 1/2" (8 to 12 mm) and supports door weights of up to 120 lbs when using three hinges. The hinge swings 90 degrees in and out, making it highly functional for various configurations, including a snug closure against clear door jambs. With a three-year warranty, you can trust the quality and reliability of this product. Ensure you use the included template for proper installation, as cut-out dimensions may differ from other brands. Elevate your shower space with the C.R. Laurence GEN344CH hinge, where exceptional design meets unmatched performance.

Polished Chrome Adjustable Wall Mount Offset Back Plate Hinge

• Adjustable to Any Angle up to 90 Degree without Having to Take Door Down
• Available in Several Beautiful Finishes
• 3 Year Warranty
• Use Monolithic Tempered Glass

The CRL Adjustable Geneva Series has taken our popular Geneva Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90 degree inward and 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb.


SPECIFICATIONS:
Glass Thickness: 5/16" to 1/2" (8 to 12 mm) Tempered Safety Glass
Special Features: Adjustable to any angle up to 90 degree without having to take door down
Construction: Solid Brass
Hinge Swings: 90 degree in and 90 degree out (at factory set position)
Closing Type: Self-Centering when within 15 degree of closed position
Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details.


Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Resources

• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Glass and Hardware Cleaning Instructions
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Hardware Catalog
• Frameless Shower Door Quote Request Form
• Frameless Shower Door Quote Request Form
• GEN337 GEN344 Template
• GEN344 Detailed CAD Drawings.dwg
• GEN344 Detailed CAD Drawings.pdf
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide
• Hardware Finish Cross-Reference Guide