CRL GR30HPS Polished Stainless 3" 90 Corner for 1/2" or 5/8" Glass Cap RailingC.R. Laurence GR30HPS Polished Stainless 3" Diameter 90 Degree Horizontal Corner is expertly designed to provide a seamless and stylish solution for your glass cap railing needs. This corner fitting accommodates 1/2" (12 mm) or 5/8" (16 mm) thick glass, allowing for hairline joint assemblies that enhance the overall aesthetic of your project. Each corner is welded, finished, and ready to install, ensuring a hassle-free experience right out of the box. The GR30HPS is available in four exquisite architectural finishes, allowing you to select the perfect match for your design scheme. It requires two connector sleeves for installation (not included), and for optimal security, the use of CRL Cat. No. 32629 Metal Contact Cement is recommended. Crafted from premium stainless steel, this product boasts a standard alloy of 304, with an option for corrosion-resistant alloy 316 available upon special request. Each horizontal corner is fabricated and individually packed for quality assurance. Please note that maintenance is advised to preserve the polished finish, as stainless steel is resistant but not entirely stain-proof. For additional information or quotes, reach out to CRL Technical Sales. Enhance your architectural vision with the GR30HPS, where durability meets elegance.
Polished Stainless 3" Diameter 90 Degree Horizontal Corner for 1/2" or 5/8" Glass Cap Railing
- Welded, Finished, and Ready-to-Install
- Four Architectural Finishes
- Requires Two Connector Sleeves (Not Included)
Interior slip-fit Horizontal Corners for 1/2" (12 mm) or 5/8" (16 mm) thick glass allow for hairline joint assemblies with straight lengths of
CRL Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.
Each Horizontal Corner is fabricated, finished, and individually packed. All of our stainless and brass corners are fabricated from CRL Premium Cap Rail, and are welded and finished to match. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For brass, alloy 260 is standard.
Please contact
CRL Technical Sales for more information or a quote.
NOTE: With the exception of the GR15 Series Cap Rail Corners, when used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When using GR15 Series Cap Rail Corners or 5/8" (16 mm) glass, use 95CBL Silicone and shims only to secure the glass.
Product Warning:
When used with 1/2" (12 mm) glass, our GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure the glass. When used with 5/8" (16 mm) glass, secure with shims and 95CBL Silicone.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Angle: 90
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Diameter: 3 in. (76 mm)
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 1/2 in. & 5/8 in. (12 mm & 16 mm)
Material: Stainless Steel
Shipping Limitations: None
Resources
