CRL H8010CH Brite Chrome Vernon Oil Dynamic Wall-to-Glass Hinge with Hold Open

CRL H8010CH Brite Chrome Vernon Oil Dynamic Wall-to-Glass Hinge with Hold Open

C.R. Laurence H8010CH Brite Chrome Vernon Oil Dynamic Full Back Plate Wall-to-Glass Hinge - Hold Open is engineered for self-closing glass doors, accommodating thicknesses from 5/16" to 9/16" (8 to 13.52 mm). Specifically designed for interior applications (not suitable for shower doors), this hinge offers a sleek aluminum body available in various finishes to complement your design aesthetic. This innovative hinge swings a full 90º with positive stops at 0º, +90º, and –90º, providing versatility in door operation. It supports doors up to 39" (1 m) wide and a maximum weight of 220 lbs. (100 kg) when using two hinges. The adjustable closing speed allows for customization to suit user preferences, while the hold-open feature at 90º enhances functionality. The Oil Dynamic Hinge is a remarkable alternative to traditional floor closers and patch fittings, allowing for a clean, all-glass installation without extensive retrofitting. It includes snap-in molded gaskets for compatibility with various glass thicknesses and comes with hex screws for easy installation. With over 1 million cycles of rigorous testing, you can trust the durability and reliability of the C.R. Laurence H8010CH hinge for your next project.

Brite Chrome Vernon Oil Dynamic Full Back Plate Wall-to-Glass Hinge - Hold Open

• For Self-Closing Glass Doors from 5/16" to 9/16" (8 to 13.52 mm) Thick
• Designed for Use on Interior Doors (Not for Shower Doors)
• Aluminum Body in Your Choice of Several Finishes
• Adjustable Closing Speed
• A Great Alternative to Floor Closers and Patch Fittings
• Use Monolithic Tempered Glass

This CRL Full Back Plate Wall Mount Hinge swings in and out a full 90º, with stops at 0º degree, +90º, and –90º. Closing speed can be adjusted. For doors up to 39" (1 m) wide. Maximum weight per two hinges is 220 lbs. (100 kg).


The Oil Dynamic Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Designed for use on interior doors leading into the bathroom area (not for Shower Doors), Oil Dynamic allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Oil Dynamic Hinges will support a 5/16" to 9/16" (8 to 13.52 mm) thick glass door up to 39" (1 m) in width and weighing up to 220 lbs. (100 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. And Oil Dynamic is ambidextrous, with positive stops at 0º and 90º, giving you even more design freedom.

The Oil Dynamic Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Oil Dynamic has been subject to strict testing (over 1 million cycles), assuring long lasting service.

SPECIFICATIONS:
Glass Thickness Range: 5/16" to 9/16" (8 to 13.52 mm)
Construction: Aluminum
Hinge Swings: 90º Inwards and Outwards (Except H8060 Model, Which Only Swings One Way)
Closing Type: Automatic Closing from 0º to 80º
Special Features: Holds Open at 90º; Adjustable Closing Speed. No Hold Open Models Available (Except H8060 Model).
Cut-Out Required
Includes: Snap-In Molded Gaskets for 5/16" to 9/16" (8 to 14.2 mm) Glass; Hex Screws
Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 220 lbs. (100 kg)

NOTE: Do not use more than two hinges on one door.


Product Warning:

Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Technical Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Resources

• H8010 H8011 H8015 H8060 Installation Instructions
• H8010 Template
• H8010BT Detailed CAD Drawings.dwg
• H8010BT Detailed CAD Drawings.dwg
• Product Care and Maintenance