CRL PDT316 3/16" PDT Belgian Metal Bond Diamond Drill

CRL PDT316 3/16" PDT Belgian Metal Bond Diamond Drill

C.R. Laurence PDT316 3/16" PDT Belgian Series Metal Bond Diamond Drill is expertly designed for high-volume glass fabrication. Its robust construction features a 3/8" diamond matrix depth, ensuring a longer lifespan and superior cutting performance. Capable of drilling between 1,000 to 2,000 holes in 1/4" (6.4 mm) glass with proper maintenance, this drill is a reliable choice for professionals in the glass industry. The PDT316 drill showcases a unique metal bond that not only enhances durability but also promotes faster cutting speeds and cooler operation compared to other drills on the market. With its Italian craftsmanship, this multi-layer drill is engineered for precision, making it ideally suited for production equipment and portable drill machines alike. Two mounting styles are available, including a straight shank or the popular Belgian thread, which fits seamlessly into both U.S. and European glass drilling machines. The drill’s extra-long 1-3/8" x 3/8" (35 x 10 mm) diameter shank provides a secure grip, facilitating accurate drilling on flat glass surfaces. For optimal safety, always wear protective gear and use a Ground Fault Circuit Interrupt Device when operating with water or coolant. The C.R. Laurence PDT316 is your go-to solution for efficient and effective glass drilling.

3/16" PDT Belgian Series Metal Bond Diamond Drill

• Designed for High-Volume Glass Fabrication
• 3/8" Diamond Matrix Depth
• Two Mounting Styles to Choose From, Straight Shank or Belgian Thread

CRL PD and PDT Series Metal Bond Diamond Drills use a special diamond and brass bond for maximum performance in glass. Metal Bond Drills offer the longest life of any type of diamond drill; 1,000 to 2,000 holes in 1/4" (6.4 mm) glass with proper maintenance and the use of a wet Sharpening Stone to expose fresh diamonds. These Italian made multi-layer drills cut faster and run cooler than any other drill on the market. They have a full 3/8" (10 mm) deep cutting surface filled with diamonds and bronze bond, which allows for extended drill life, but also makes this style of drill more fragile. They should always be used in true running machines on flat glass surfaces. The CRL PD Series features an extra long 1-3/8" x 3/8" (35 x 10 mm) diameter shank for a positive grip on the drill. The CRL PDT Series features Belgian style mounting threads, also known as 1/2" (12.7 mm) gas thread, which are popular among all U.S. and European glass drilling machines. They can be used in portable drill machines such as the CRL AMZ1,but they are especially suited for production equipment.


NOTE: Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupt Device (Cat. No. GF1) must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.