CRL PH41LMBL Matte Black Left Hand Sidelite Transom Patch with Support Fin and 1NT300 InsertC.R. Laurence PH41LMBL Matte Black Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert offers a sophisticated solution for supporting transoms from sidelight glass panels. Designed for use with both 2-3/4" and 2-9/16" pivot setback door patch fittings, this versatile patch accommodates 3/8" or 1/2" (10 or 12 mm) monolithic tempered glass, ensuring durability and reliability. The left-hand configuration makes installation straightforward, while the included 1NT300 insert allows seamless compatibility with CRL top door patch fittings such as the PH20A and PH21A. For those seeking flexibility, the insert can be removed on the non-hinged side for double swinging doors, and additional inserts are available for creating one-way doors or for top door installations. Crucially, if the transom exceeds 100 lbs. (45.4 kg), it must be supported from the ceiling to prevent slippage. The support fin glass should adhere to approved design criteria, ensuring structural integrity. This product comes with a template and instructions to facilitate precise installation. Note that these fittings are not suitable for laminated glass, making it essential to select the right materials for your project. The elegant matte black finish enhances any architectural design, merging function with aesthetic appeal.
Matte Black Left Hand Sidelite Transom Patch With Support Fin Bracket and 1NT300 Insert
- Works with Both 2-3/4" and 2-9/16" (70 and 65 mm) Pivot Setback Door Patch Fittings
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Left and Right Handed
- Use Monolithic Tempered Glass
The CRL Left Hand Sidelite Mounted Transom Patch with Support Fin Bracket is used to support a transom from a sidelite glass panel. It comes with a INT300 Insert for mounting a door with a CRL PH20A or PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a INT305 Transom Patch Keeper Insert can be installed for use with an AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a Ceiling Mounted Support Fin Bracket.
" target="_blank">https://www.crlaurence.com/p/1NT300">INT300 Insert for mounting a door with a CRL
PH20A or
PH21A Top Door Patch Fitting. For single doors, the insert can be removed on the non-hinged side allowing for a double swinging door. A
INT306 Transom Patch Door Stop Insert can be used to create a one way door. Also, a
INT305 Transom Patch Keeper Insert can be installed for use with an
AMR205 Lock when used for a top of the door installation. The support fin glass should be sized in accordance with approved design criteria (refer to GANA or Manufacturers Manual) and secured to the ceiling with a
Ceiling Mounted Support Fin Bracket.
If the weight of the transom exceeds 100 lbs. (45.4 kg) the transom must be supported from the ceiling. This is to prevent the Patches from slipping from too much weight. Use either Cat. No. B5BC Smoke Baffle Channel or PH94 Patch Fittings. Please contact our Technical Sales Department for assistance.
GLASS FABRICATION REQUIRED:
Five 3/4" (19 mm) Diameter
Holes and Two Corner Notches
COMES WITH:
Template and Instructions
Product Warning:
These fittings are not for use with Laminated Glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Matte Black
Glazing Thickness: 3/8 in., 1/2 in. (10 mm, 12 mm)
Handing: Left Hand
Insert Type: 1NT300
Mounting Type: Sidelite
Shipping Limitations: None
With Insert: Yes
Resources
