CRL PH70BR Brass Transom Connector with Reversible Door StopsC.R. Laurence PH70BR Brass Transom Mounted Connector With Two Reversible Door Stops offers a versatile solution for your glass door systems. Designed to accommodate 3/8" or 1/2" (10 or 12 mm) monolithic tempered glass, this connector enables doors to swing either in or out, providing flexibility in your architectural design. The dual door stop feature allows for customized functionality, allowing one door to open in while the other swings out, enhancing usability in various spaces. This connector is suitable for both one lite and two lite transoms, ensuring compatibility with multiple configurations. When the stops are removed, it can function purely as a connector, offering an additional layer of adaptability. For a seamless finish, it is recommended to rotate the fitting so that the notches in the cover plates remain hidden from view. Included with your purchase are templates and instructions to facilitate easy installation, but be aware that glass fabrication requires two 3/4" (19 mm) diameter holes. It's important to note that these fittings are not suitable for laminated glass. With a polished brass finish, the connector blends elegance with functionality, though it may oxidize over time, resulting in a tarnished appearance.
Brass Transom Mounted Connector With Two Reversible Door Stops
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Doors Can Swing Either In or Out
- Use Monolithic Tempered Glass
CRL Door Stops can be set for the doors to only open in or out. You can also make it so one door opens in and the other door opens out. The Connector can be used on one lite or two lite transoms, and with the stops removed can be used as a Connector only. When used as Connector only, it is suggested that you turn the fitting around so the notches in the Cover Plates face up, and are not visible.
The connector can be used on one lite or two lite transoms, and with the stops removed, can be used as a Connector only. When used as Connector only, it is suggested that you turn the fitting around so the notches in the Cover Plates face up, and are not visible.
GLASS FABRICATION REQUIRED:
Two 3/4" (19 mm) Diameter Holes
COMES WITH:
Template and Instructions
Product Warning:
NOTE: These Fittings are not for use with laminated glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Brass Finish Advisory:
Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Polished Brass
Glazing Thickness: 3/8 in. (10 mm)
Shipping Limitations: None
Resources
