CRL PH70BS Brushed Stainless Transom Connector with Reversible Door StopsC.R. Laurence PH70BS Brushed Stainless Transom Mounted Connector with Two Reversible Door Stops is designed for versatility and functionality in modern architectural applications. This connector accommodates both 3/8" and 1/2" (10 or 12 mm) monolithic tempered glass, making it a robust choice for various projects. The PH70BS allows doors to swing either inward or outward, providing flexibility in design and space usage. With the innovative reversible door stops, you can configure the doors to open in one direction or set them up so one door opens in while the other opens out, enhancing accessibility and convenience. Installation is straightforward, and the product comes complete with a template and instructions to facilitate the process. Notably, the connector can be utilized on one lite or two lite transoms, and when the door stops are removed, it functions as a connector only. For a clean appearance when used solely as a connector, it is recommended to position the fitting so that the notches in the cover plates face upward and remain unobtrusive. Please note that glass fabrication requires two 3/4" (19 mm) diameter holes, and this fitting is not suitable for laminated glass. Periodic maintenance is advised to maintain the brushed stainless steel finish, ensuring lasting durability and aesthetic appeal.
Brushed Stainless Transom Mounted Connector with Two Reversible Door Stops
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Doors Can Swing Either In or Out
- Use Monolithic Tempered Glass
CRL Door Stops can be set for the doors to only open in or out. You can also make it so one door opens in and the other door opens out. The Connector can be used on one lite or two lite transoms, and with the stops removed can be used as a Connector only. When used as Connector only, it is suggested that you turn the fitting around so the notches in the Cover Plates face up, and are not visible.
The connector can be used on one lite or two lite transoms, and with the stops removed, can be used as a Connector only. When used as Connector only, it is suggested that you turn the fitting around so the notches in the Cover Plates face up, and are not visible.
GLASS FABRICATION REQUIRED:
Two 3/4" (19 mm) Diameter Holes
COMES WITH:
Template and Instructions
Product Warning:
NOTE: These Fittings are not for use with laminated glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: Brushed Stainless Steel
Glazing Thickness: 1/2 in. (12 mm)
Shipping Limitations: None
Resources
