CRL PP4324EBS Brushed Stainless 24" High 1.5" Square Plaza Series Counter End PostC.R. Laurence PP4324EBS Brushed Stainless 24" High 1-1/2" Square PP43 Plaza Series Counter/Partition End Post is designed to elevate both functionality and aesthetics in any space. Crafted from robust 1-1/2" (38 mm) square stainless steel tubing, this post accommodates 1/4" (6 mm) glass using full-length U-Channels, ensuring a secure and stylish installation. Available in standard heights of 12", 18", and 24" (305, 457, and 610 mm), the post features a flat top cap and a welded base plate for added stability. The welded flange base allows for easy installation on various surfaces, including wood, marble, or vitreous countertops, using the included screws. Each kit comes complete with one post, one welded flange base, one top cap, and installation screws, making setup straightforward. CRL also offers the flexibility of custom posts, fabricated and shipped from Los Angeles within three to five working days. For the DIY enthusiast, stock component parts are readily available, allowing you to create complete units in your own workshop. With its brushed stainless finish, the PP43 series is not only resistant to corrosion but also adds a modern touch to your architectural designs. Periodic maintenance is recommended to maintain its factory finish and longevity.
Brushed Stainless 24" High 1-1/2" Square PP43 Plaza Series Counter/Partition End Post
- Stock Model PP43 Posts
- 1-1/2" (38 mm) Square Stainless Steel Posts with Full Length Channels for 1/4" (6 mm) Glass
- Standard Heights of 12", 18", and 24" (305, 457, and 610 mm) with Flat Cap and Welded Base Plate
- Five Standard Configurations – End, Center, Corner, 3-Way, and 4-Way
- Use Monolithic Tempered Glass
CRL Plaza Series Glass Partition and Divider Posts are constructed with 1-1/2" (38 mm) Stainless Steel Square Tubing. 1/4" (6 mm) glass can be attached to the full length U-Channels with Cat. No. 33SC Clear Silicone, which meets CRL Standards.
Model PP43 Posts are available off the shelf in two stock sizes and two finishes. You can install them in wood, marble or vitreous counter tops using the Welded Flange Base and the supplied screws. Each Kit contains one Post, one Welded Flange Base, one Top Cap, and Installation Screws. (Flat Top Cap Included)
These Posts are stock sizes and are ready-to-ship to you. We can fabricate Custom Posts to ship from Los Angeles, California within three to five working days. Also, for Do-it-Yourselfers we offer stock component parts ready-to-ship so you can fabricate complete units in your own shop.
Posts measure 1-1/2" (38 mm) square; Welded base plates measure 3" (76.2 mm) square; 1/4" (6 mm) glazing channels measure full length, and rise 1/2" (12.7 mm) from the post surface.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Base Type: Square Flat - Welded
Cap Type: Flat
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Configuration: Non-Handed End Post
Finish/ Color:: Brushed Stainless Steel
Glazed: No
Glazing Attachment Type: U-Channel
Glazing Thickness: 1/4 in. (6 mm)
Height: 24 in. (609.6 mm)
Material: Stainless Steel
Series: Plaza
Shipping Limitations: None
Tube Size: 1-1/2 in. (38.1 mm)
Tube Type: Square
Resources
