CRL SCS1002 GE 1000 White Contractors Silicone SealantC.R. Laurence SCS1002 White GE 1000 Contractors Silicone Sealant is a versatile, one-part acetic cure silicone designed specifically for general-purpose glazing and curtainwall sealing applications that demand long-lasting reliability. This high-performance sealant boasts a ±25% joint movement capability, ensuring it can accommodate the natural expansion and contraction of building materials. Ideal for a variety of sealing tasks, the GE 1000 is particularly effective on sheet metal, skylights, ventilators, air conditioning systems, metal or plastic signs, and glass block structures. It remains effective across a wide temperature range, retaining its cured properties from -40˚ to 400˚F (-40˚ to 204˚C), and can even be applied outdoors at temperatures as low as -35˚F (-37˚C) when surfaces are clean, dry, and frost-free. Complying with rigorous standards, it meets Federal Specifications TT-S-001543A and ASTM C-920, ensuring quality and performance. However, it is important to note that this sealant is not intended for structural glazing or masonry applications. Packaged in a convenient 10.1 oz. cartridge, the GE 1000 Contractors Silicone Sealant is a reliable choice for building professionals looking for an effective sealant solution.
White GE 1000 Contractors Silicone Sealant
- Easy to Use for General Purpose Glazing
- ±25% Joint Movement Capability
GE® 1000 is a one-part acetic cure silicone sealant designed for general purpose glazing and curtainwall sealing applications where long-term reliability is required.
Basic Uses Well suited for general sealing applications such as sheet metal, skylights, ventilators, air conditioning systems, metal or plastic signs, glass block structures, and as a bedding for marine hardware. GE® 1000 retains its cured properties from -40˚ to 400˚F (-40˚ to 204˚C). It can be applied at outdoor temperatures as low as -35˚F (-37˚C) provided only that surfaces are clean, dry, and frost-free.
Technical Data It meets or exceeds the following specification standards: Federal Specifications TT-S-001543A (COM-NBS) Class A for silicone building sealants, and TT-S-00230C (COM-NBS) Class A for one component building sealants; ASTM C-920, Type S, Grade NS, Class 25, Use NT, G, A and O; CAN/CGSB-19.13-M87. USDA, FDA, NSF Status.
Limitations GE® 1000 Contactors Silicone Sealant is not intended for structural glazing, or for use on masonry. Check cartridge label and Specification Data Sheet for additional limitations.
Comparable Sealants
CRL: 33S.
Dap: 100% Silicone.
Dow Corning®: 999-A; 786; 732; 700; Glazing Silicone; General Purpose; Commercial Grade 100%; Tub, Tile & Ceramic; HVAC/R.
GE®: 1200 Construction, 1700 Sanitary.
Tremco®: Proglaze, Tremsil 200, TremPro 644. OSI: HM-270.
Pecora: 860, 863.
Sonneborn: OmniPlus.
Sika®: SikaSil®-GP.
Product Warning:
Not recommended for structural glazing; aquariums; bathrooms; concrete, marble, limestone, lead, zinc, or below water; mirror installations without the approval of the mirror manufacturer. Not recommended for glazing of two-part silicone edge-sealed insulating glass units. Check cartridge label and Specification Data Sheet for additional limitations.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Attributes
Cartridge Contents: 10.1 oz. (300 ml)
Case Quantity: 24
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Finish/ Color:: White
Pallet Quantity: 96 Cases
Shelf Life: 18
Shipping Limitations: None
Resources
