CRL TD320P 3M Trizact 3" A20 PSA Polishing Disc

CRL TD320P 3M Trizact 3" A20 PSA Polishing Disc

CRL TD320P 3M Trizact 3" A20 PSA Polishing Disc is an essential tool for glass scratch repair, featuring the innovative 3M® Trizact® abrasive system. This system employs a unique design of small pyramids that uniformly distributes abrasive material, ensuring a cleaner and long-lasting performance. Ideal for both starter and professional kits, this disc allows for seamless transitions through various grades to achieve a flawless finish-from fine ground glass to crystal-clear surfaces. With its versatility, the CRL TD320P effectively removes light to deep scratches, scuffs, wiper marks, and stains from a wide range of glass surfaces. It revitalizes items such as windshields and tabletops, making them look new again. The disc is designed for wet use with plain water, and it is crucial to work through each grade thoroughly to avoid leaving any small defects. Measuring 3 inches in diameter, the A20 grade polishing disc is a valuable addition to any glass fabrication process, allowing for high-polish finishes without messy slurries. Always ensure to wear appropriate respiratory and protective gear during use, as specified by the manufacturer, to ensure safety. Transform your glass repair projects with the reliability and effectiveness of the CRL TD320P 3M Trizact Polishing Disc.

3M Trizact 3" A20 PSA Polishing Disc

• 3M® Trizact® - A Cleaner, Long-Lasting Abrasive System for Glass Scratch Repair
• Starter and Professional Kits are Both Easy-to-Use
• Several Grades Available

CRL introduced 3M® Trizact® Abrasive Film to the glass industry. This material uses natural abrasive formed in the shape of small pyramids, and provides uniform layers of abrasive throughout the pyramid. As abrasive particles are exposed and used, they fall down and are flushed away between the pyramids.


This easy-to-use system uses five grades to go from a fine ground finish on glass to absolutely clear! It is perfect for scratch removal, edge finishing and a variety of other applications. No more messy slurries and contamination problems!

The potential for this material in your glass fabrication process is amazing! For a small investment, you can purchase equipment and supplies to remove scratches in flat and curved glass, and to create your own finished products, including "high polish" work.

3M® Trizact® will remove light or deep scratches, scuffs, wiper marks, and stains on a variety of glass surfaces. Makes an old windshield or table top look like new again!

3M® Trizact® should always be used wet, with plain water. Polish requires using each grade long enough to remove all scratches from the previous grade. If this is not done, small defects will remain in the finished product. When using "high polish clear" (cerium), work surface must be flushed with water between stages to remove loose abrasive.


Product Warning:

Always wear the proper respiratory and protective safety gear as specified by the manufacturer when using this product. Failure to do so can lead to immediate and long-term injury.

Resources

• Trizact Glass Defect Repair System Instructions AVDB3136-Trizact-Glass-Defect-Repair-System.pdf