CRL UV70330 UV703 High Viscosity UV Adhesive, 30g

CRL UV70330 UV703 High Viscosity UV Adhesive, 30g

C.R. Laurence UV703 High Viscosity UV Adhesive - 30g is engineered for exceptional performance, making it the go-to solution for adhering all-glass showcases, shelves, furniture, towel bars, and standoff bases. This 100% solids adhesive forms resilient, high-strength bonds between various materials, including glass, steel, aluminum, stainless steel, and many plastics, ensuring versatility in your applications. With an optically clear finish, the UV703 adhesive provides aesthetic appeal while delivering fast cure times when exposed to ultraviolet light. It can achieve tensile and shear strength ratings of 2046 psi, making it ideal for demanding environments. The acceptable bondline gap ranges from 1 to 2 mil, allowing for precise applications. Notably, the adhesive does not possess capillary properties, requiring application directly to the bonding surface, which is perfect for frameless shower door installations. The cured adhesive is resistant to moisture and yellowing, ensuring a long-lasting bond. For optimal adhesion, it is recommended to prepare surfaces with CRL7528 Cleaner and Degreaser to remove any contaminants. Please note that the shelf life is 12 months, and caution should be taken when bonding plastics. Always test compatibility to ensure satisfactory results. Store the adhesive away from sunlight for best performance.

UV703 High Viscosity UV Adhesive - 30g

• Use to Adhere 'All-Glass' Showcases, Shelves, Furniture, Towel Bars, and Standoff Bases
• Optically Clear
• Fast, High-Strength Bonds
• Acceptable Bondline Gap: 1 to 2 mil (.0254 to .0508 mm)
• Tensile/Shear Strength: 2046 psi
• Shore D Hardness: 50-60

CRL UV703 is a high viscosity, 100% solids, general purpose adhesive that forms resilient, high strength bonds between materials such as glass, steel, aluminum, stainless steel, and many plastics.


CRL UV703 is ideal for making all-glass showcases, glass shelves, and glass furniture. This adhesive does not have capillary properties; therefore it must be applied to the bonding surface prior to assembling the parts, so it is ideal for gluing on Glass Door Knobs or Metal Towel Bars in frameless shower door installations, as well as adhering metal Standoff Bases to glass.

Bonds prepared with CRL UV703 are optically clear as well as resistant to moisture and yellowing. The adhesive cures within seconds upon exposure to ultraviolet light. The speed of cure depends on the UV intensity as measured at the product surface, as well as the adhesive depth. CRL UV703 has outstanding ability to cure through large gaps and it cures to a hard surface that is transparent. Store adhesive away from sunlight. CRL7528 Cleaner and Degreaser provide optimum adhesion when used first to prepare the glass by removing any dirt and grease that is present.

Cleaner and Degreaser provides for optimum adhesion when used first to prepare the glass by removing any dirt and grease that is present.

NOTE: When bonding plastics, always test first, as not all plastics can be bonded properly. Do not bond any coated parts (powder coated or galvanized) with this adhesive.


Product Warning:

Shelf Life: 12 months from lot # date on label

Resources

• Adhesive Calculation Information
• Installation Instructions UV Instructions.pdf
• LEED Statement
• Safety Data Sheets UV70330.pdf
• Specifications UV703 TDS.pdf