CRL ZL710PS Z-Series Polished Stainless Steel Radius Base Zinc Clamps for 3/8" 1/2" GlassC.R. Laurence ZL710PS Polished Stainless Steel Z-Series Square Type Radius Base Zinc Clamps provide an effective solution for securing glass panels in a variety of applications, including partitions, railings, and windbreaks. Designed for use with monolithic tempered glass, these clamps accommodate glass thicknesses of 3/8" (10 mm) and 1/2" (12 mm), ensuring versatility and reliability. The clamps feature a repositionable plate, allowing for easy installation at either the right or left corner of the glass, which simplifies orientation during setup. Constructed from durable stainless steel with a polished finish, the ZL710PS not only offers robust support but also enhances the aesthetic appeal of your project. The radius base design is optimized for use with 2" (51 mm) diameter round tubing, making it an ideal choice for modern architectural designs. For glass fabrication, the 3/8" thick glass requires a 1/2" (12 mm) diameter hole if using the provided steel pin for support, while the 1/2" thick glass requires a 9/16" (14 mm) diameter hole. With a height of 2-3/8" (60 mm) and a width of 2-1/8" (54 mm), these clamps are engineered for both strength and functionality, ensuring a secure fit for your glazing needs.
Polished Stainless Steel Z-Series Square Type Radius Base Zinc Clamps for 3/8" and 1/2" Glass with Repositionable Plate
- Repositionable Plate for Use at Right or Left Corner of Glass
- For Use with 2" (51 mm) Diameter Round Tubing
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Radius Surface Mounting
- Use Monolithic Tempered Glass
This
CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 3/8" (10 mm) and 1/2" (12.7 mm). Constructed from stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.
Note: Replacement screws are available by ordering CRL Cat. No. ZCS5X15SS & for Replacement gaskets order CRL Cat. No. ZL38SG
SPECIFICATIONS:
Glass Thickness: 3/8" or 1/2" (10 or 12 mm).
Base Design: Radius.
For Use With: 2" (51 mm) Diameter Round Tubing.
Material: Stainless Steel
Glass Fabrication:
For 3/8" (10 mm) Thick Glass: 1/2" (12 mm) diameter hole required if using provided steel pin for glass support.
For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Repositionable Plate for Use at Right or Left Corner of Glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Stainless Steel Advisory:
Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Attributes
Base Type: Radius
Compliance and Restrictions: Warning Reproductive Harm - www.p65warnings.ca.gov
Depth: 1-3/32 in. (28 mm)
Finish/ Color:: Polished Stainless Steel
Glazing Thickness: 3/8 in. & 1/2 in. (10 mm To 12 mm)
Height: 2-3/8 in. (60 mm)
Material: Zinc
Profile: Square
Shipping Limitations: None
Width: 2-1/8 in. (54 mm)
Resources
